1207KR
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-TTU-TRB-3 1/4-ECO/ECC
Ball Bearing Units · Dimensions on request
43 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-TTU-TRB-3 1/4-ECO/ECC is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 43 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 43 lb |
| Catalogue Ref. | e7oiLQdneH |
| C0 Static Load Rating | 108600 lb |
| Dimension A | 2-1/2 in |
| Dimension A1 | 2-1/2 in |
| Dimension Ac | 6 in |
| Dimension B | Series 5 in |
| Dimension H | Series 9-Series 5/Series 8 in |
| Dimension H1 | Series 8-Series 5/16 in |
| Dimension L | Series 9-1/2 in |
| Dimension L1 | Series 9 in |
| Dimension L2 | 4.46 in |
| Dimension Series H2 | 4.05 in |
| Dimension d1 | Series 5-17/Series 32 in |
| Dimension d2 | 6.7 in |
| Housing Width | 3-1/2 in |
| K Factor | 1.19 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 3.25 in |
| Shaft Size Type | Imperial |
| Type E Closed Cover Number | EUC-H |
| Type E Open Cover Number | EUDR-3 1/4 |
| UPC Code | 0883450506243 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.71 |
| Y (if Fa/Fr > e) | 2.07 |
| e | 0.50 |
SNT 506-605 - 22206K - TA506/ 1
📏 Dimensions on request
GY1115KRRB SGT
📏 Dimensions on request
SCJ1 15/16
📏 Dimensions on request
TAFK15K207S
📏 Dimensions on request
QVVF19V085S
📏 Dimensions on request
E-TTU-TRB-85MM-ECO
📏 Dimensions on request
SAF 22540 7-1/4
📏 Dimensions on request
C-UKF211D1;H2311X
📏 Dimensions on request
PA207
📏 Dimensions on request
F204
📏 Dimensions on request
PA206
📏 Dimensions on request
F203
📏 Dimensions on request
AK207
📏 Dimensions on request