VCJ3/4
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN MSE1008BRHFRSS
Ball Bearing Units · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN MSE1008BRHFRSS is a Ball Bearing Units, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | I9DF7marb5 |
| Bearing - Housing - Seal | MSE1008BRHRSS |
| Bearing Number | MSE1008BR |
| Bearing Type | Split Cylindrical Retained Type |
| Bolt Size | Series 8 x M30 |
| Ca - Axial Load Rating | 25583 lbf113.80 kN |
| Cor - Static Load Rating | 529875 lbf2357 kN |
| Cr - Dynamic Load Rating | 331818 lbf1476 kN |
| Dimension H | 159 mm6.3 in |
| Dimension L | 291 mm11.5 in |
| Dimension N | 603.25 mm23.750 in |
| Dimension P | 38 mm1.5 in |
| Dimension R | 682 mm26.9 in |
| Dimension T | 762 mm30.0 in |
| Dimension V | Series 5 mm0.2 in |
| Maximum Speed | 670 rpm |
| Note | This product line was formerly known as "Revolvo" |
| Seal Type | Viton Single Lip |
| Series Type | Medium Series |
| Shaft Size | Series 10.500 in |
| Support Type | Round Flange |
SUCBTBY210-30/F
📏 Dimensions on request
LSE814BRHFRSS
📏 Dimensions on request
UCFL207
📏 Dimensions on request
QAAPX18A308S
📏 Dimensions on request
FSNT 212 - 22212 - TSNG212
📏 Dimensions on request
SUCBT206/FVSL613
📏 Dimensions on request
QVVP19V307S
📏 Dimensions on request
SUCAF208-25/F
📏 Dimensions on request
QAP18A304S
📏 Dimensions on request
SYH 1.5/16 FM
📏 Dimensions on request