UCFL207
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN LSE814BRHFRSS
Ball Bearing Units · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN LSE814BRHFRSS is a Ball Bearing Units, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | I9l1clcwdE |
| Bearing - Housing - Seal | LSE814BRHRSS |
| Bearing Number | LSE814BR |
| Bearing Type | Split Cylindrical Retained Type |
| Bolt Size | 4 x M30 |
| Ca - Axial Load Rating | 11016 lbf49.00 kN |
| Cor - Static Load Rating | 262577 lbf1168 kN |
| Cr - Dynamic Load Rating | 159165 lbf708 kN |
| Dimension H | 117 mm4.6 in |
| Dimension L | 206 mm8.1 in |
| Dimension N | 431.81 mm17 in |
| Dimension P | 35 mm1.4 in |
| Dimension R | 512 mm20.2 in |
| Dimension T | 584 mm23.0 in |
| Dimension V | 3 mm0.1 in |
| Maximum Speed | 930 rpm |
| Note | This product line was formerly known as Revolvo |
| Seal Type | Viton Single Lip |
| Series Type | Light Series |
| Shaft Size | 8.875 in |
| Support Type | Round Flange |
QAAPX18A308S
📏 Dimensions on request
FSNT 212 - 22212 - TSNG212
📏 Dimensions on request
SUCBT206/FVSL613
📏 Dimensions on request
QVVP19V307S
📏 Dimensions on request
SUCAF208-25/F
📏 Dimensions on request
QAP18A304S
📏 Dimensions on request
SYH 1.5/16 FM
📏 Dimensions on request
QVF19V085S
📏 Dimensions on request
UELFC201-8
📏 Dimensions on request
SUCATBYM204-12/F
📏 Dimensions on request
HCTB209-28
📏 Dimensions on request
HCTB208
📏 Dimensions on request