LSE300BXHS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN LSM80BRHSNA
Custom & Special Bearings · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN LSM80BRHSNA is a Custom & Special Bearings, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | onELxAcpdv |
| Bearing Number | LSM80BR |
| Bearing Type | Split Cylindrical Retained Type |
| Bearing UPC | 013992030719 |
| Bolt Size | 2 x M20 |
| Ca - Axial Load Rating | 2787.59 lbf12.40 kN |
| Cor - Static Load Rating | 51931 lbf231 kN |
| Cr - Dynamic Load Rating | 42039 lbf187 kN |
| Dimension H | 112 mm |
| Dimension H2 | 242 mm |
| Dimension J | 290 mm |
| Dimension L | 345 mm |
| Dimension M | 100 mm |
| Housing Width | 134 mm5.3 in |
| Maximum Speed | 2790 rpm |
| Note | This product line was formerly known as Revolvo |
| Pillow/Plummer Block Style | Split Cylindrical Housed Unit - Angled |
| Seal Type | Felt Type |
| Series Type | Light Series |
| Shaft Size | 80.000 mm |
| Support Type | Two-Bolt Plummer Block |
68514436176
📏 Dimensions on request
68514457648
📏 Dimensions on request
LSE600BRHSAFQATL
📏 Dimensions on request
69790498074
📏 Dimensions on request
LSM140BRHSNATL
📏 Dimensions on request
KIT.KWVE45-B-310
📏 Dimensions on request
68514457619
📏 Dimensions on request
68514485264
📏 Dimensions on request
LSM90BRHSNQBATL
📏 Dimensions on request
LSM230BRHSHTPS
📏 Dimensions on request
LSM80BXHSHTPS
📏 Dimensions on request