LSM90BRHSNQBATL
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514485264
Custom & Special Bearings · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514485264 is a Custom & Special Bearings, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | opOfmX8X9f |
| Color | Black |
| Dimension J-1 | 80 mm3.15 in |
| Dimension J-2 | Series 60 mm2.36 in |
| Dimension K | Series 20 mm0.79 in |
| Dimension L | 90 mm3.54 in |
| Dimension O | 6 mm0.24 in |
| Dimension P | Series 8 mm0.31 in |
| Dimension Series G | Series 5 mm0.2 in |
| Dimension Series M | Series 20 mm |
| Dimension T | Series 8.5 mm |
| Distance at Series 20° Angle of Pretension (Normal Force Level) (Dimension S) | 28 mm1.1 in |
| Element Material | Natural Rubber |
| Force at Series 20° Angle of Pretension (Normal Force Level) (Dimension F) | 40 NSeries 9 lb |
| Mounting Bolt Size | M6 x Series 20 |
| Mounting Bolt Torque | Series 10 N·m89 in·lb |
| Normal Temperature Range | -40 to 80 oF |
| Notes | The recommended angle of pretension is Series 20°. This provides the tensioner a maximum capability to absorb vibrations and shock loads, while also maintaining a range of motion to address the system’s belt or chain stretch.Mounting accessories into the "Hard" Position results in approximately 25% higher tensioning force over the "normal" position.Metric standard tensioner units all come with a mounting screw, but do not come with the sprocket idler bolt (which is supplied instead with RunRight metric idler sprockets). |
| Outside Diameter (Dim D) | 35 mm1.38 in |
| Overall Length (Dim E) | 51 mm2.01 in |
| Style | Elastomeric |
| Tensioner | RT11-Series M |
| Type | Chain/Belt Tensioner |
| UPC Number | 85264 |
LSM230BRHSHTPS
📏 Dimensions on request
LSM80BXHSHTPS
📏 Dimensions on request
MSE715BRHFHTPS
📏 Dimensions on request
68514458094
📏 Dimensions on request
LSM85BRHSNBHTPS
📏 Dimensions on request
69790498124
📏 Dimensions on request
MSE608BRHSAFQATL
📏 Dimensions on request
22322KEMW33W800C4
📏 Dimensions on request
MSE312BXHSATL
📏 Dimensions on request
GRA102RRB
📏 Dimensions on request
48685 - 48620
📏 Dimensions on request
HSM240BRHSATL
📏 Dimensions on request