GW210PPB4
📏 90 mm
Product Photo
INACustom & Special Bearings
INA KWVE30-B
Custom & Special Bearings · 90 mm
90Width B (mm)
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The INA KWVE30-B is a Custom & Special Bearings, with a bore diameter (d) of mm, an outer diameter (D) of mm and a width (B) of 90 mm. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | INA |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | B 90 mm |
| Catalogue Ref. | 3NWVmz2L1A |
| 1) | Locating surface |
| 2) | Marking |
| 3) | According to DIN 71 412-B M6 Standard, Tapered lubrication nipple supplied loose |
| A1 | 31 mm |
| A2 | Series 9 mm |
| A3 | 11.5 mm |
| A4 | 7 mm |
| B | 90 mm |
| C | 27500 N |
| C0 | 55000 N |
| H | 42 mm |
| H1 | 5.9 mm |
| H4 | 13.Series 8 mm |
| HSeries 5 | 6.25 mm |
| JB | 72 mm |
| JL | 52 mm |
| JL6 | 15.5 mm |
| JLZ | Series 44 mm |
| K1 | M8 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M3 = 2,Series 5 M4 = Series 5 M5 = Series 10 M6 = 17 M8 = Series 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, Screw locking measures required. |
| K3 | M8 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M3 = 2,Series 5 M4 = Series 5 M5 = Series 10 M6 = 17 M8 = Series 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, Screw locking measures required. |
| K6 | M8 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M3 = 2,Series 5 M4 = Series 5 M5 = Series 10 M6 = 17 M8 = Series 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 If possible, Screw locking measures required. |
| L | 99 mm |
| L1 | 72 mm |
| LS | 1.65 mm |
| N3 | 5.5 mm |
| N4 | 5.5 mm |
| S | 0.Series 8 mm |
| Series G2 | M10 According to DIN ISO 4762-12.9Screw of MaximumLocking torque (Nm) : M5 = Series 5,Series 8 M6 = Series 10 M8 = 24 M10 = Series 41 M12 = 83 M14 = 140 If possible, Screw locking measures required. |
| Series M0x | 970 Nm |
| Series M0y | 660 Nm |
| Series M0z | 660 Nm |
| T6 | 11.5 mm |
| TSeries 5 | Series 12 mm |
| W6 | 6 mm |
| aL max | 71 mm |
| aL min | Series 20 mm |
| aR max | 71 mm |
| aR min | Series 20 mm |
| b | 28 mm |
| h | 23.5 mm |
| h1 | 11.5 mm |
| jL | 80 mm |
| lmax | 2960 mm |
| mS | 4.3 kg/m |
| mW | 1200 g |
V130C65-65
📏 90 mm
KUVE30-B-N
📏 90 mm
V130C85-65
📏 90 mm
KWSE30-L
📏 90 mm
V130C55-55
📏 90 mm
KWVE30-B-EC
📏 90 mm
KWVE30-B-NL
📏 90 mm
GW210PP4
📏 90 mm
KUVE30-B-L
📏 90 mm
HCCE 015 R
📏 90 mm
W210PP2
📏 90 mm
V125C80-60
📏 90 mm
V125C60-60
📏 90 mm