V130C85-65
📏 90 mm
Product Photo
INACustom & Special Bearings
INA KUVE30-B-N
Custom & Special Bearings · 90 mm
90Width B (mm)
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The INA KUVE30-B-N is a Custom & Special Bearings, with a bore diameter (d) of mm, an outer diameter (D) of mm and a width (B) of 90 mm. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | INA |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | B 90 mm |
| Catalogue Ref. | 6J4Iltblcc |
| 1) | LocatingSurface |
| 2) | mark |
| 3) | according to DIN 71 412-B M6 Standard type,Withcone-headedLubricationMouth is provided loosely |
| A1 | 31 mm |
| A2 | 9 mm |
| A3 | 7.5 mm |
| A4 | 4.95 mm |
| B | 90 mm |
| C | 27500 N |
| C0 | 55000 N |
| G2 | M10 according to DIN ISO 4762-12.9of screws MaximumLocking torque(Nm): M5 = 5,8 M6 = 10 M8 = 24 M10 = 41 M12 = 83 M14 = 140 if possible,Measures should be taken to prevent screws from loosening. |
| H | 38 mm |
| H1 | 5.9 mm |
| H4 | 9.8 mm |
| H5 | 6.25 mm |
| JB | 72 mm |
| JL | 52 mm |
| JL6 | 15.1 mm |
| JLZ | 44 mm |
| K1 | M8 according to DIN ISO 4762-12.9of screws MaximumLocking torque(Nm): M3 = 2,5 M4 = 5 M5 = 10 M6 = 17 M8 = 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 if possible,Measures should be taken to prevent screws from loosening. |
| K3 | M8 according to DIN ISO 4762-12.9of screws MaximumLocking torque(Nm): M3 = 2,5 M4 = 5 M5 = 10 M6 = 17 M8 = 41 M10 = 83 M12 = 140 M14 = 220 M16 = 340 if possible,Measures should be taken to prevent screws from loosening. |
| K6 | M8 according to DIN 7984-8.8 Standard typeof screws MaximumLocking torque(Nm): M4 = 2 M5 = 4 M6 = 8 M8 = 12 M10 = 35 if possible,Measures should be taken to prevent screws from loosening. |
| L | 99 mm |
| L1 | 72 mm |
| LS | 1.65 mm |
| M0x | 970 Nm |
| M0y | 700 Nm |
| M0z | 700 Nm |
| N3 | 5.5 mm |
| N4 | 4.5 mm |
| S | 0.8 mm |
| T5 | 12 mm |
| T6 | 9 mm |
| W6 | 6 mm |
| aL max | 71 mm |
| aL min | 20 mm |
| aR max | 71 mm |
| aR min | 20 mm |
| b | 28 mm |
| h | 23.5 mm |
| h1 | 11.5 mm |
| jL | 80 mm |
| lmax | 2960 mm |
| mS | 4.3 kg/m |
| mW | 1000 g |
KWSE30-L
📏 90 mm
V130C55-55
📏 90 mm
KWVE30-B-EC
📏 90 mm
KWVE30-B-NL
📏 90 mm
GW210PP4
📏 90 mm
KUVE30-B-L
📏 90 mm
HCCE 015 R
📏 90 mm
W210PP2
📏 90 mm
V125C80-60
📏 90 mm
V125C60-60
📏 90 mm
W210PPB4
📏 90 mm
W210PP4
📏 90 mm
KUVE30-B-NL
📏 90 mm