SUCBF204-12/F
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-TU-TRB-75MM-ECC
Ball Bearing Units · Dimensions on request
30 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-TU-TRB-75MM-ECC is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 30 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 30 lb |
| Catalogue Ref. | gMSRrobmcd |
| C0 Static Load Rating | 61200 lb |
| Dimension A1 | 1-13/16 in |
| Dimension A2 | 3 in |
| Dimension Ac | 4.2 in |
| Dimension B | 4-1/2 in |
| Dimension H | 6-3/4 in |
| Dimension H1 | 5-15/16 in |
| Dimension H2 | 4-15/16 in |
| Dimension L | 9-3/16 in |
| Dimension L1 | 5-7/8 in |
| Dimension L2 | 1-1/8 in |
| Dimension L3 | 4-3/4 in |
| Dimension N | 1-11/16 in |
| Dimension N1 | 1-1/2 in |
| Dimension N2 | 2-3/4 in |
| Dimension d1 | 4-23/32 in |
| Dimension d2 | 5.65 in |
| K Factor | 1.30 |
| Note | Note: All units have a 1/8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 75 mm2.953 in |
| Shaft Size Type | Metric |
| Type E Closed Cover Number | EUC-G |
| UPC Code | 0883450505475 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.87 |
| Y (if Fa/Fr > e) | 2.26 |
| e | 0.46 |
SNT 520-617 - 22220 - VR220
📏 Dimensions on request
LSE400BXHGKPS
📏 Dimensions on request
MSE611BRHF
📏 Dimensions on request
SDAF 23268K 12-7/16
📏 Dimensions on request
QASN11A203S
📏 Dimensions on request
RTU 1 11/16
📏 Dimensions on request
UKF210 - HE2310
📏 Dimensions on request
HSE600BRHFHTPS
📏 Dimensions on request
TAPK22K100S
📏 Dimensions on request
LSM105BXHGRSS
📏 Dimensions on request
FSNT 512-610 - 22310K - VR610
📏 Dimensions on request
QVVPG15V207S
📏 Dimensions on request
SUCPLFB206-20/F
📏 Dimensions on request