SUCPLFB206-20/F
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVVPG15V207S
Ball Bearing Units · Dimensions on request
13.20 Kg29 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVVPG15V207S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 13.20 Kg29 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 13.20 Kg29 lb |
| Catalogue Ref. | gPC8uXcmdr |
| Bearing Number | 22215 |
| C - Dynamic Load (Basic) | 49900 lb222 kN |
| C0 - Static Load | 54100 lb240 kN |
| Dimension A | 80.0 mm3.15 in |
| Dimension B | 162.1 mm6.38 in |
| Dimension C | 94 mm3.7 in |
| Dimension D Max | 246.1 mm9.69 in |
| Dimension D Min | 201.7 mm7.94 in |
| Dimension E | 39.6 mm1.56 in |
| Dimension F | 276.4 mm10.88 in |
| Dimension G | 79.50 mm3.130 in |
| Dimension H | 30.2 mm1.19 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension L | 91.7 mm3.61 in |
| Dimension RVV | 15.7 mm0.62 in |
| Dimension SVV | 103.9 mm4.09 in |
| Eng Internal Radial Clearance - Max | 0.0037 |
| Eng Internal Radial Clearance - Min | 0.0030 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVVPG15V207ST |
| Grease Lubrication - B/C/O Seal | 1300 rpm |
| Grease Lubrication - M/N Seal | 1600 rpm |
| Grease Lubrication - T Seal | 2400 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Locking Style | Double V-Lock |
| Oil Lubrication - B/C/O Seal | 1300 rpm |
| Oil Lubrication - M/N Seal | 1600 rpm |
| Oil Lubrication - T Seal | 2900 rpm |
| Pre Install Clearance Max | 0.095 mm0.0037 in |
| Pre Install Clearance Min | 0.075 mm0.0030 in |
| Shaft Size | 2-7/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.038 mm0.0015 in |
| UPC Code | 0883450247511 |
| Y1 - Geometry Factor | 3.14 |
| Y2 - Geometry Factor | 4.67 |
| e - Geometry Factor | 0.22 |
SAF 22622 3-7/8
📏 Dimensions on request
LCJT 1 1/2
📏 Dimensions on request
UELP215-48
📏 Dimensions on request
UCFL207-20
📏 Dimensions on request
QVFK26V110S
📏 Dimensions on request
YAS 1 3/4 SGT
📏 Dimensions on request
SUCBFB209-26/F
📏 Dimensions on request
NAU4LKBP210-30
📏 Dimensions on request
NAU4LKSTB206
📏 Dimensions on request
RCJT 7/8
📏 Dimensions on request
UKT210 - HE2310
📏 Dimensions on request
SUCBFB207-22/F
📏 Dimensions on request