SUCBT210/F
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-PF-TRB-85MM-ECO
Ball Bearing Units · Dimensions on request
43 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-PF-TRB-85MM-ECO is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 43 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 43 lb |
| Catalogue Ref. | hUqOMg2F1s |
| Bolt Diameter | 3/4 in |
| C0 Static Load Rating | 108600 lb |
| Dimension A | 4-3/16 in |
| Dimension A1 | 15/16 in |
| Dimension A2 | 1-11/16 in |
| Dimension A3 | 1-1/4 in |
| Dimension Ac | 5.4875 in |
| Dimension B | 5 in |
| Dimension E | 2-7/16 in |
| Dimension H | 10-1/4 in |
| Dimension J | 8-5/8 in |
| Dimension N2 | 6.100 in |
| Dimension d1 | 5-17/32 in |
| Dimension d2 | 6.7 in |
| K Factor | 1.19 |
| Nose Bore Diameter | 5.8 in |
| Nose Diameter | 6.89 in |
| Note | Note: All units have a 1/8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 85 mm3.346 in |
| Shaft Size Type | Metric |
| Type E Open Cover Number | EUDR-85MM |
| UPC Code | 0883450508148 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.71 |
| Y (if Fa/Fr > e) | 2.07 |
| e | 0.50 |
QVVFL19V090S
📏 Dimensions on request
UCP210-30
📏 Dimensions on request
QMP13J207S
📏 Dimensions on request
HSE511BXHFRSS
📏 Dimensions on request
YTU SGT 25
📏 Dimensions on request
SUCSTB207-23/FVSL613
📏 Dimensions on request
LSE1012BRHFKPS
📏 Dimensions on request
UCFL212
📏 Dimensions on request
UCP204-12
📏 Dimensions on request
QAAPXT15A215S
📏 Dimensions on request
LSM120BXHFATL
📏 Dimensions on request
UC205-14
📏 Dimensions on request
QMF18J304S
📏 Dimensions on request