LSM120BXHFATL
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QAAPXT15A215S
Ball Bearing Units · Dimensions on request
12.7 Kg28 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QAAPXT15A215S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 12.7 Kg28 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 12.7 Kg28 lb |
| Catalogue Ref. | hXnTq13D2E |
| Bearing Number | 22215 |
| C - Dynamic Load (Basic) | 49900 lb222 kN |
| C0 - Static Load | 54100 lb240 kN |
| Dimension A | 88.9 mm3.50 in |
| Dimension B | 173.7 mm6.84 in |
| Dimension C | 109 mm4.29 in |
| Dimension D Max | 265.2 mm10.44 in |
| Dimension D Min | 230.1 mm9.06 in |
| Dimension F | 330.20 mm13.000 in |
| Dimension G | 75.70 mm2.980 in |
| Dimension H | 35.1 mm1.38 in |
| Dimension J (Bolt Size) | 24 mm0.875 in |
| Dimension L | 98.0 mm3.86 in |
| Dimension M | 60.2 mm2.37 in |
| Dimension RAA | 22.4 mm0.88 in |
| Dimension SAA | 120.4 mm4.74 in |
| Eng Internal Radial Clearance - Max | 0.0031 |
| Eng Internal Radial Clearance - Min | 0.0020 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QAAPXT15A215ST |
| Grease Lubrication - B/C/O Seal | 1300 rpm |
| Grease Lubrication - M/N Seal | 1600 rpm |
| Grease Lubrication - T Seal | 2400 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Double Concentric |
| Oil Lubrication - B/C/O Seal | 1300 rpm |
| Oil Lubrication - M/N Seal | 1600 rpm |
| Oil Lubrication - T Seal | 2900 rpm |
| Pre Install Clearance Max | 0.080 mm0.0031 in |
| Pre Install Clearance Min | 0.050 mm0.0020 in |
| Shaft Size | 2-15/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.051 mm0.0020 in |
| UPC Code | 0883450952354 |
| Y1 - Geometry Factor | 3.14 |
| Y2 - Geometry Factor | 4.67 |
| e - Geometry Factor | 0.22 |
UC205-14
📏 Dimensions on request
QMF18J304S
📏 Dimensions on request
UCFC208
📏 Dimensions on request
UELFL207-22
📏 Dimensions on request
SNT 515-612 - 21312 - LO312
📏 Dimensions on request
UK217 - HE2317
📏 Dimensions on request
SNT 207 - 22207 - TSNG207
📏 Dimensions on request
HSE515BRHFKPS
📏 Dimensions on request
FSNT 515-612 - 22215K - LO515
📏 Dimensions on request
YCJT 35 SGT
📏 Dimensions on request
QVVFC26V407S
📏 Dimensions on request
SAF 22522
📏 Dimensions on request
MSE704BRHFKPS
📏 Dimensions on request