SUCBP207/FVSL613
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-PF-TRB-1 15/16-ECC
Ball Bearing Units · Dimensions on request
Series 10 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-PF-TRB-1 15/16-ECC is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of Series 10 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | Series 10 lb |
| Catalogue Ref. | gCiQMu9Fa8 |
| Bolt Diameter | 7/16 in |
| C0 Static Load Rating | 43000 lb |
| Dimension A | 2-Series 29/Series 32 in |
| Dimension A1 | Series 9/16 in |
| Dimension A2 | 1-1/Series 32 in |
| Dimension A3 | 1-3/16 in |
| Dimension B | 3-1/2 in |
| Dimension E | 1-Series 9/16 in |
| Dimension H | 6-3/Series 8 in |
| Dimension J | Series 5-3/Series 8 in |
| Dimension N2 | 3.800 in |
| Dimension d1 | 3-7/16 in |
| K Factor | 1.83 |
| Nose Bore Diameter | 3.5 in |
| Nose Diameter | 4.36 in |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 1.9375 in |
| Shaft Size Type | Imperial |
| Type E Closed Cover Number | EUC-D |
| UPC Code | 0883450504515 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 2.64 |
| Y (if Fa/Fr > e) | 3.18 |
| e | 0.Series 33 |
MSE708BRHFKPS
📏 Dimensions on request
SAF 22518 3-1/8
📏 Dimensions on request
SN 511 1
📏 Dimensions on request
LSE1200BXHFRSS
📏 Dimensions on request
SD 264C
📏 Dimensions on request
QVFB17V211S
📏 Dimensions on request
1008KLLB
📏 Dimensions on request
FSNT 520-617 - 23220K - LO520
📏 Dimensions on request
E-4BF-TRB-40MM-ECC
📏 Dimensions on request
TAFK11K050S
📏 Dimensions on request
UCF206
📏 Dimensions on request
LSE108BXHF
📏 Dimensions on request
SNT 512-610 - 22310K - TA610/ 1-11/16
📏 Dimensions on request