1008KLLB
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVFB17V211S
Ball Bearing Units · Dimensions on request
13.6 Kg30 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVFB17V211S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 13.6 Kg30 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 13.6 Kg30 lb |
| Catalogue Ref. | gEW3A29Oai |
| Bearing Number | 22217 |
| C - Dynamic Load (Basic) | 66900 lb297 kN |
| C0 - Static Load | 71900 lb320 kN |
| Dimension A | 282.4 mm11.12 in |
| Dimension BC | 240 mm9.45 in |
| Dimension C | 106.4 mm4.19 in |
| Dimension D | 190.000 mm7.480 in |
| Dimension E | 169.7 mm6.68 in |
| Dimension F | 212.1 mm8.35 in |
| Dimension G | 25.4 mm1 in |
| Dimension H | 25.4 mm1.00 in |
| Dimension J (Bolt Size) | 16 mm0.625 in |
| Dimension L | 83.8 mm3.3 in |
| Dimension N | 69.9 mm2.7500 in |
| Dimension RV | 1.0 mm0.04 in |
| Dimension SV | 84.6 mm3.33 in |
| Eng Internal Radial Clearance - Max | 0.0047 |
| Eng Internal Radial Clearance - Min | 0.0037 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVFB17V211ST |
| Grease Lubrication - B/C/O Seal | 1100 rpm |
| Grease Lubrication - M/N Seal | 1400 rpm |
| Grease Lubrication - T Seal | 2000 rpm |
| Housing Construction | Four-Bolt Square Flange |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 1100 rpm |
| Oil Lubrication - M/N Seal | 1400 rpm |
| Oil Lubrication - T Seal | 2400 rpm |
| Pre Install Clearance Max | 0.120 mm0.0047 in |
| Pre Install Clearance Min | 0.095 mm0.0037 in |
| Shaft Size | 2-11/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.051 mm0.0020 in |
| UPC Code | 0883450284103 |
| Y1 - Geometry Factor | 2.90 |
| Y2 - Geometry Factor | 4.31 |
| e - Geometry Factor | 0.23 |
FSNT 520-617 - 23220K - LO520
📏 Dimensions on request
E-4BF-TRB-40MM-ECC
📏 Dimensions on request
TAFK11K050S
📏 Dimensions on request
UCF206
📏 Dimensions on request
LSE108BXHF
📏 Dimensions on request
SNT 512-610 - 22310K - TA610/ 1-11/16
📏 Dimensions on request
FS207
📏 Dimensions on request
UKFC212 - HS2312
📏 Dimensions on request
SAF 22516
📏 Dimensions on request
NAU4LKSP205-16
📏 Dimensions on request
MSE612BRHFATL
📏 Dimensions on request
1105KPPB2
📏 Dimensions on request