QMP15J211S
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-P4B-TRB-85MM-ECC
Ball Bearing Units · Dimensions on request
46.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-P4B-TRB-85MM-ECC is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 46.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 46.0 lb |
| Catalogue Ref. | IdXZTT2i10 |
| Bolt Diameter | 3/4 in |
| C0 Static Load Rating | 108600 lb |
| Dimension A | 4-1/2 in |
| Dimension Ac | 5.7 in |
| Dimension B | 5 in |
| Dimension H | 3-3/4 in |
| Dimension H1 | 2-1/4 in |
| Dimension H2 | 7-1/2 in |
| Dimension J Max. | 11-1/4 in |
| Dimension J Min. | 10-3/4 in |
| Dimension L | 13-1/2 in |
| Dimension N | 15/16 in |
| Dimension N1 | 1-3/16 in |
| Dimension N2 | 2-3/8 in |
| Dimension d1 | 5-17/32 in |
| Dimension d2 | 6.7 in |
| K Factor | 1.19 |
| Note | Note: All units have a 1/8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 85 mm3.346 in |
| Shaft Size Type | Metric |
| Type E Closed Cover Number | EUC-H |
| UPC Code | 0883450504461 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.71 |
| Y (if Fa/Fr > e) | 2.07 |
| e | 0.50 |
SUCAP207-23/F
📏 Dimensions on request
QVCW19V080S
📏 Dimensions on request
LSM130BXHFRSS
📏 Dimensions on request
SN 526 2
📏 Dimensions on request
SAF 23024K 4-1/8
📏 Dimensions on request
SUC
📏 Dimensions on request
NAU4LKAP206-18
📏 Dimensions on request
NAU4LKPLP210-30
📏 Dimensions on request
LSE112BXHFATL
📏 Dimensions on request
SUCSTB207-23/F
📏 Dimensions on request
VCJT 2 3/16
📏 Dimensions on request
HSM250BXHFKPS
📏 Dimensions on request