SUCAP207-23/F
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QMP15J211S
Ball Bearing Units · Dimensions on request
12.7 Kg28 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QMP15J211S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 12.7 Kg28 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 12.7 Kg28 lb |
| Catalogue Ref. | IdcJry9k9I |
| Bearing Number | 22215 |
| C - Dynamic Load (Basic) | 49900 lbSeries 222 kN |
| C0 - Static Load | 54100 lb240 kN |
| Dimension A | 79.5 mm3.13 in |
| Dimension B | 164.3 mm6.47 in |
| Dimension C | 101.9 mm4.01 in |
| Dimension D Max | 244.6 mm9.63 in |
| Dimension D Min | 200.2 mm7.88 in |
| Dimension F | 294.6 mm11.60 in |
| Dimension H | 35.1 mm1.38 in |
| Dimension J (Bolt Size) | Series 20 mm0.750 in |
| Dimension K | 31.Series 8 mm1.25 in |
| Dimension L | 98.3 mm3.87 in |
| Dimension R | 6.4 mm0.25 in |
| Dimension S | 91.9 mm3.62 in |
| Dimension Series G | 76.200 mm3.0000 in |
| Dimension Series M | 60.2 mm2.37 in |
| Eng Internal Radial Clearance - Max | 0.0031 |
| Eng Internal Radial Clearance - Min | 0.0020 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QMP15J211STHT |
| Grease Lubrication - B/C/O Seal | 1300 rpm |
| Grease Lubrication - Series M/N Seal | 1600 rpm |
| Grease Lubrication - T Seal | 2400 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Eccentric |
| Oil Lubrication - B/C/O Seal | 1300 rpm |
| Oil Lubrication - Series M/N Seal | 1600 rpm |
| Oil Lubrication - T Seal | 2900 rpm |
| Pre Install Clearance Max | 0.080 mm0.0031 in |
| Pre Install Clearance Min | 0.050 mm0.0020 in |
| Shaft Size | 2-11/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.051 mm0.0020 in |
| UPC Code | 0883450462648 |
| Y1 - Geometry Factor | 3.14 |
| Y2 - Geometry Factor | 4.67 |
| e - Geometry Factor | 0.22 |
QVCW19V080S
📏 Dimensions on request
LSM130BXHFRSS
📏 Dimensions on request
SN 526 2
📏 Dimensions on request
SAF 23024K 4-1/8
📏 Dimensions on request
SUC
📏 Dimensions on request
NAU4LKAP206-18
📏 Dimensions on request
NAU4LKPLP210-30
📏 Dimensions on request
LSE112BXHFATL
📏 Dimensions on request
SUCSTB207-23/F
📏 Dimensions on request
VCJT 2 3/16
📏 Dimensions on request
HSM250BXHFKPS
📏 Dimensions on request
VAS 35
📏 Dimensions on request