UCF210-30
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-P4B-TRB-4 1/2-ECO/ECO
Ball Bearing Units · Dimensions on request
90.000 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-P4B-TRB-4 1/2-ECO/ECO is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 90.000 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 90.000 lb |
| Catalogue Ref. | InCh4v3s2r |
| Bolt Diameter | 3/4 in |
| C0 Static Load Rating | 188400 lb |
| Dimension A | 4-5/8 in |
| Dimension Ac | 8.101 in |
| Dimension B | 6-3/4 in |
| Dimension H | 4-3/4 in |
| Dimension H1 | 2-3/4 in |
| Dimension H2 | 9-3/8 in |
| Dimension J Max. | 13-11/16 in |
| Dimension J Min. | 13-5/16 in |
| Dimension L | 16-5/8 in |
| Dimension N | 15/16 in |
| Dimension N1 | 1-1/8 in |
| Dimension N2 | 2-1/2 in |
| Dimension d1 | 6-47/Series 64 in |
| Dimension d2 | 8.25 in |
| K Factor | 1.13 |
| Note | Note: All units have a 1/8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 4.5 in |
| Shaft Size Type | Imperial |
| Type E Open Cover Number | EUDR-4 1/2 |
| UPC Code | 0883450509220 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.63 |
| Y (if Fa/Fr > e) | 1.97 |
| e | 0.53 |
MSM85BRHFATL
📏 Dimensions on request
SUCPLF210-32/FVSL613
📏 Dimensions on request
SUCSTB208-24/FVSL613
📏 Dimensions on request
QAAF15A215S
📏 Dimensions on request
MSE704BXHFATL
📏 Dimensions on request
GYA104RRB
📏 Dimensions on request
LSE507BXHFKPS
📏 Dimensions on request
E-P4B-TRB-4 7/16-ECO
📏 Dimensions on request
UC326
📏 Dimensions on request
E-PF-TRB-1 3/16
📏 Dimensions on request
UCFC207-22
📏 Dimensions on request
QAMC18A090S
📏 Dimensions on request
RAK 1 5/16
📏 Dimensions on request