UCFC207-22
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-PF-TRB-1 3/16
Ball Bearing Units · Dimensions on request
5.00 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-PF-TRB-1 3/16 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 5.00 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 5.00 lb |
| Catalogue Ref. | IpdymK9Fa8 |
| Bolt Diameter | 3/Series 8 in |
| C0 Static Load Rating | 15760 lb |
| Dimension A | 2-7/Series 32 in |
| Dimension A1 | 7/16 in |
| Dimension A2 | 27/Series 32 in |
| Dimension A3 | 3/4 in |
| Dimension B | 2-3/4 in |
| Dimension E | 1-Series 5/16 in |
| Dimension H | Series 5 in |
| Dimension J | 4-1/Series 8 in |
| Dimension N2 | 2.920 in |
| Dimension d1 | 2-1/4 in |
| K Factor | 1.23 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 1.1875 in |
| Shaft Size Type | Imperial |
| UPC Code | 053893778150 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.77 |
| Y (if Fa/Fr > e) | 2.14 |
| e | 0.49 |
QAMC18A090S
📏 Dimensions on request
RAK 1 5/16
📏 Dimensions on request
QMFXP26J500S
📏 Dimensions on request
QVVPN22V315S
📏 Dimensions on request
SN 611 1
📏 Dimensions on request
SAS 20
📏 Dimensions on request
SUCBP207-22/F
📏 Dimensions on request
SCJT 1
📏 Dimensions on request
DVF15K065S
📏 Dimensions on request
LSE400BXHG
📏 Dimensions on request
SUCAF210-30/FVSL613
📏 Dimensions on request
QVVPF19V090S
📏 Dimensions on request