VJ-PDRJ 315
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN E-P2B-TRB-40MM-ECO/ECC
Ball Bearing Units · Dimensions on request
Series 10 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN E-P2B-TRB-40MM-ECO/ECC is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of Series 10 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | Series 10 lb |
| Catalogue Ref. | Rw9nTRcddg |
| Bolt Diameter | 1/2 in |
| C0 Static Load Rating | 33000 lb |
| Dimension A | 2-3/Series 8 in |
| Dimension Ac | 4.439 in |
| Dimension B | 3-3/Series 8 in |
| Dimension H | 2-1/Series 8 in |
| Dimension H1 | 1-1/4 in |
| Dimension H2 | 4-1/4 in |
| Dimension J Max. | 6-3/Series 8 in |
| Dimension J Min. | 6-1/Series 8 in |
| Dimension L | 7-7/Series 8 in |
| Dimension N | Series 5/Series 8 in |
| Dimension N1 | 3/4 in |
| Dimension d1 | 3-3/16 in |
| Dimension d2 | 3.95 in |
| K Factor | 1.36 |
| Note | Note: All units have a 1/Series 8" pipe thread grease fittingThe Maximum Permissible Thrust Load applies to conditions of slip fit with set screw mounting or in applications where a large moment loading occurs. The values shownare valid only when two collars and set screws are used.When heavy thrust forces are applied, the friction between the pillow block base may not be sufficient to prevent movement. Mechanical stops or shear bars withstrength sufficient to support the load should be added. Never weld the pillow block or bearing to secure it to the shaft or base. |
| Shaft Size | 40 mm1.575 in |
| Shaft Size Type | Metric |
| Type E Closed Cover Number | EUC-C |
| Type E Open Cover Number | EUDR-40MM |
| UPC Code | 0883450505727 |
| X (if Fa/Fr ≤ e) | 0.87 |
| X (if Fa/Fr > e) | 0.7 |
| Y (if Fa/Fr ≤ e) | 1.96 |
| Y (if Fa/Fr > e) | 2.37 |
| e | 0.44 |
QVC26V110S
📏 Dimensions on request
SR 480x27
📏 Dimensions on request
QVFY28V415S
📏 Dimensions on request
SNTD 3068 - 23068K - LO68
📏 Dimensions on request
YA115RR2
📏 Dimensions on request
LCJO1 11/16
📏 Dimensions on request
SAF 22618 3-1/8
📏 Dimensions on request
UELP206
📏 Dimensions on request
UKF215D1;H2315X
📏 Dimensions on request
QVSN26V115S
📏 Dimensions on request
SUCATBY206-18/F
📏 Dimensions on request
QVFX26V115S
📏 Dimensions on request
QVPK20V080S
📏 Dimensions on request