SUCATBY206-18/F
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVSN26V115S
Ball Bearing Units · Dimensions on request
39.9 Kg88 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVSN26V115S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 39.9 Kg88 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 39.9 Kg88 lb |
| Catalogue Ref. | RzKFxKdgey |
| Bearing Number | 22226 |
| C - Dynamic Load (Basic) | 170000 lb757 kN |
| C0 - Static Load | 212000 lb945 kN |
| Dimension A | 150.0 mm5.91 in |
| Dimension B | 280.0 mm11.02 in |
| Dimension C | 175 mm6.89 in |
| Dimension D Max | 400.0 mm15.75 in |
| Dimension D Min | 367.0 mm14.45 in |
| Dimension F | 445 mm17.52 in |
| Dimension G | 113.00 mm4.450 in |
| Dimension H | 49.0 mm1.92 in |
| Dimension J (Bolt Size) | 24 mm0.875 in |
| Dimension L | 146 mm5.75 in |
| Dimension RV | 1.8 mm0.07 in |
| Dimension SV | 147.8 mm5.82 in |
| Eng Internal Radial Clearance - Max | 0.0067 |
| Eng Internal Radial Clearance - Min | 0.0053 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVSN26V115ST |
| Grease Lubrication - B/C/O Seal | 400 rpm |
| Grease Lubrication - M/N Seal | 700 rpm |
| Grease Lubrication - T Seal | 1000 rpm |
| Housing Construction | Two-Bolt Pillow Block |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 400 rpm |
| Oil Lubrication - M/N Seal | 700 rpm |
| Oil Lubrication - T Seal | 1500 rpm |
| Pre Install Clearance Max | 0.170 mm0.0067 in |
| Pre Install Clearance Min | 0.135 mm0.0053 in |
| Shaft Size | 115 mm |
| Shaft Size Type | Metric |
| Shaft Tolerance | 0.127 mm0.0050 in |
| UPC Code | 0883450293099 |
| Y1 - Geometry Factor | 2.62 |
| Y2 - Geometry Factor | 3.90 |
| e - Geometry Factor | 0.26 |
QVFX26V115S
📏 Dimensions on request
QVPK20V080S
📏 Dimensions on request
SUCBTBY207-22/F
📏 Dimensions on request
TCJ1 3/4
📏 Dimensions on request
QAAMH18A304S
📏 Dimensions on request
QAFL20A315S
📏 Dimensions on request
UCF305
📏 Dimensions on request
QMMC18J307S
📏 Dimensions on request
SNT 507-606 - 21306K - LO606/ 15/16
📏 Dimensions on request
TCJ15/16
📏 Dimensions on request
YCJTM 1
📏 Dimensions on request
UELP206-20
📏 Dimensions on request
E-TTU-TRB-3 3/16-ECO
📏 Dimensions on request