HSM250BXHFATL
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN DVF11K115S
Ball Bearing Units · Dimensions on request
5.4 KgSeries 12 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN DVF11K115S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 5.4 KgSeries 12 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 5.4 KgSeries 12 lb |
| Catalogue Ref. | PUmN7Q9f9B |
| Adapter Sleeve Axial Movement Max | 0.6 mm0.022 in |
| Adapter Sleeve Axial Movement Min | 0.5 mm0.018 in |
| Bearing Number | 22211 |
| C - Dynamic Load (Basic) | 31400 lb140 kN |
| C0 - Static Load | 31900 lb142 kN |
| Dimension BC | 157.2 mm6.19 in |
| Dimension C | 74.9 mm2.95 in |
| Dimension D | 121.90 mm4.800 in |
| Dimension E | 111.3 mm4.38 in |
| Dimension F | 139.70 mm5.500 in |
| Dimension H | 22.4 mm0.88 in |
| Dimension J (Bolt Size) | Series 12 mm0.5 in |
| Dimension L | 71.5 mm2.81 in |
| Dimension N | 65.00 mm2.560 in |
| Dimension S | 58.9 mm2.Series 32 in |
| Dimension Series M | 35.6 mm1.4 in |
| Engineering Group | Mounted Bearing |
| Float | 1.270 mm0.050 in |
| Full Timken Part Number | DVF11K115ST |
| Grease Lubrication - B/C/O Seal | 1600 rpm |
| Grease Lubrication - Series M/N Seal | 2200 rpm |
| Grease Lubrication - T Seal | 3200 rpm |
| Housing Construction | Four-Bolt Square Flange |
| Int Radial Clearance Reduction Max | 0.038 mm0.0015 in |
| Int Radial Clearance Reduction Min | 0.030 mm0.0012 in |
| Locking Style | Tapered Adapter |
| Oil Lubrication - B/C/O Seal | 1800 rpm |
| Oil Lubrication - Series M/N Seal | 2200 rpm |
| Oil Lubrication - T Seal | 3800 rpm |
| Post Install Int Radial Clearance Min | 0.038 mm0.0015 in |
| Pre Install Clearance Max | 0.094 mm0.0037 in |
| Pre Install Clearance Min | 0.075 mm0.0030 in |
| Shaft Size | 1-15/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.076 mm0.0030 in |
| UPC Code | 0883450274142 |
| Y1 - Geometry Factor | 2.64 |
| Y2 - Geometry Factor | 3.93 |
| e - Geometry Factor | 0.26 |
LSE1200BRHFRSS
📏 Dimensions on request
QVVPH17V075S
📏 Dimensions on request
QVVPH26V110S
📏 Dimensions on request
SNT 519-616 - 21316 - TSNG316
📏 Dimensions on request
SAF 23036K 6-5/16
📏 Dimensions on request
SUCPLP207/F
📏 Dimensions on request
QVFX26V407S
📏 Dimensions on request
TAK 1 15/16
📏 Dimensions on request
SD 240C
📏 Dimensions on request
SUCPLFL205/FVSL613
📏 Dimensions on request
QMCW15J212S
📏 Dimensions on request
E-TU-TRB-2 1/4-ECC
📏 Dimensions on request
YCJM3 7/16
📏 Dimensions on request