TAK 1 15/16
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN QVFX26V407S
Ball Bearing Units · Dimensions on request
49.0 Kg108.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN QVFX26V407S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 49.0 Kg108.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 49.0 Kg108.0 lb |
| Catalogue Ref. | PWsl9V4y3O |
| Bearing Number | 22226 |
| C - Dynamic Load (Basic) | 170000 lb757 kN |
| C0 - Static Load | 212000 lb945 kN |
| Dimension C | 230.10 mm9.060 in |
| Dimension E | 163.6 mm6.44 in |
| Dimension H | 38.1 mm1.50 in |
| Dimension J (Bolt Size) | 24 mm1 in |
| Dimension L Exp | 142.7 mm5.62 in |
| Dimension L Fix | 140.5 mm5.53 in |
| Dimension N | 106.90 mm4.210 in |
| Dimension RV | 7.4 mm0.29 in |
| Dimension SV | 147.8 mm5.82 in |
| Eng Internal Radial Clearance - Max | 0.0067 |
| Eng Internal Radial Clearance - Min | 0.0053 |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | QVFX26V407ST |
| Grease Lubrication - B/C/O Seal | 400 rpm |
| Grease Lubrication - M/N Seal | 700 rpm |
| Grease Lubrication - T Seal | 1000 rpm |
| Housing Construction | Four-Bolt Square Flange |
| Locking Style | Single V-Lock |
| Oil Lubrication - B/C/O Seal | 400 rpm |
| Oil Lubrication - M/N Seal | 700 rpm |
| Oil Lubrication - T Seal | 1500 rpm |
| Pre Install Clearance Max | 0.170 mm0.0067 in |
| Pre Install Clearance Min | 0.135 mm0.0053 in |
| Shaft Size | 4-7/16 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.127 mm0.0050 in |
| UPC Code | 0883450338417 |
| Y1 - Geometry Factor | 2.43 |
| Y2 - Geometry Factor | 3.61 |
| e - Geometry Factor | 0.28 |
SD 240C
📏 Dimensions on request
SUCPLFL205/FVSL613
📏 Dimensions on request
QMCW15J212S
📏 Dimensions on request
E-TU-TRB-2 1/4-ECC
📏 Dimensions on request
YCJM3 7/16
📏 Dimensions on request
UC311
📏 Dimensions on request
QMPL18J080S
📏 Dimensions on request
SNT 510-608 - 22210K - TSNG510
📏 Dimensions on request
69790400401
📏 Dimensions on request
NAU4LKSP209-26
📏 Dimensions on request
SUCPLFL205-16/FVSL613
📏 Dimensions on request
QAAPXT15A212S
📏 Dimensions on request
VTU 2 3/16
📏 Dimensions on request