22328KEMW33W800C4
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498416
Custom & Special Bearings · Dimensions on request
2.93 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498416 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 2.93 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 2.93 lb |
| Catalogue Ref. | cBNrJ3311U |
| # of Locking Screws | 8 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 24.00 mm0.945 in |
| Coupling Size | SLD 1450 |
| Cubic inches | 1025.39754 mm³40.36998 in3 |
| Diameter to Flange (Dimension D1) | 124.00 mm4.882 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 73.00 mm2.875 in |
| Locking Screw Size (Dimension T) | M10 |
| Max. Transmissible Axial Force | 29466.00 lbf |
| Max. Transmissible Torque | 3530.00 ft·lb |
| Pressure on The Hub | 17355.00 psi |
| Pressure on The Shaft | 18222.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 58.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 115 mm4.528 in |
| Shaft Size | 2 7/8 in |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 40.00 mm1.575 in |
| Tolerance of Hub Bore (T2) | -0 +0.0022 in |
| Tolerance of Shaft (T1) | +0 -0.0018 in |
| Total Width at Relaxed State (Dimension L) | 50.01 mm1.969 in |
| Type | Internal |
| Width to Flange (Dimension A) | 29.01 mm1.142 in |
LSE303BXHSAFQBKPS
📏 Dimensions on request
031PKG
📏 Dimensions on request
LSE304BXHSAFQ-4B
📏 Dimensions on request
TKVD30-W
📏 Dimensions on request
SNT 520-617 - 22220K - TSNG520
📏 Dimensions on request
68514425106
📏 Dimensions on request
69790498112
📏 Dimensions on request
LSM75BXHSNQATL
📏 Dimensions on request
69790498036
📏 Dimensions on request
68514461113
📏 Dimensions on request
MSM60BXHFKPS
📏 Dimensions on request
68514435446
📏 Dimensions on request