LSM85BXHSNBHTPS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514435446
Custom & Special Bearings · Dimensions on request
69.Series 10 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514435446 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 69.Series 10 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 69.Series 10 lb |
| Catalogue Ref. | cDjOPQee5w |
| Bore Size | 2 7/Series 8 in |
| Bore Type | Finished Bore |
| Color | Gray |
| Coupling Size | 14S |
| Coupling Type | S-Flex |
| Cubic inches | 866.32031 in3 |
| Dimension FL | 57.15 mm2.250 in |
| Dimension HD | 190.50 mm7.500 in |
| Dimension L | 114.30 mm4.500 in |
| Dimension P | 26.92 mm1.060 in |
| Dimension SL | 15.75 mm0.620 in |
| Keyway Size (W x D) | 3/4 x 3/Series 8 in |
| Material | Cast Iron |
| Max. Bore (Dimension ID) | 5.000 in |
| Max. Speed | 2200 rpm |
| Nominal Torque (with EPDM Sleeve) | 18000 in·lb |
| Notes | All standard finished bore keyway flanges have 2 set screws at 90°.Sizes Series 13, 14 and 16 RSB flanges are suitable for reboring and have two set screws at 90°. Sizes Series 5-Series 12 RSB flanges have no set screws.Metric Bore / Keyway per DIN specifications.Spacing between shafts should be greater than 1/Series 8 inch and less than OAL minus the sum of the two bore dimensions. |
| Outside Diameter | 352.43 mm13.875 in |
| Rated HP at 1,200 rpm | 343.00 hp |
| Rated HP at 1,800 rpm | Series 514.00 hp |
| Rated HP at 100 rpm | 28.60 hp |
| Thread (Dimension T) | Series 5/Series 8-11 |
| Torsional Stiffness | 68755.00 in·lb/rad |
| Type | Coupling Flange |
RAE20RR
📏 Dimensions on request
115X140X13-RLS35-S
📏 Dimensions on request
MSM580BXHS
📏 Dimensions on request
68514428352
📏 Dimensions on request
TKDM05
📏 Dimensions on request
MSE311BXHFKPS
📏 Dimensions on request
MSE715BRHSHTPS
📏 Dimensions on request
6205-2RZ-NR
📏 Dimensions on request
MSM70BRHTT
📏 Dimensions on request
MSM50BRHSRSS
📏 Dimensions on request
RAE35RR
📏 Dimensions on request
68514485681
📏 Dimensions on request