KIT.KWVE20-B-309
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498390
Custom & Special Bearings · Dimensions on request
18.08 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498390 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 18.08 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 18.08 lb |
| Catalogue Ref. | liRbv92Y1R |
| # of Locking Screws | 15 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 44.00 mm1.732 in |
| Coupling Size | SLD1450 |
| Cubic inches | 7557.33203 mm³297.53276 in3 |
| Diameter to Flange (Dimension D1) | 259.00 mm10.197 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 190.00 mm7.480 in |
| Locking Screw Size (Dimension T) | M14 |
| Max. Transmissible Axial Force | 104092.00 lbf |
| Max. Transmissible Torque | 32443.00 ft·lb |
| Pressure on The Hub | 17047.00 psi |
| Pressure on The Shaft | 16449.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 161.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 250.01 mm9.843 in |
| Shaft Size | 190 x 250 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 64.00 mm2.520 in |
| Tolerance of Hub Bore (T2) | -0 +0.0028 in |
| Tolerance of Shaft (T1) | +0 -0.0028 in |
| Total Width at Relaxed State (Dimension L) | 78.00 mm3.071 in |
| Type | Internal |
| Width to Flange (Dimension A) | 49.00 mm1.929 in |
62X90X10-R2LS32-S
📏 Dimensions on request
68514485028
📏 Dimensions on request
22X32X7-RLS35-S
📏 Dimensions on request
231/500YMBW507C08C3
📏 Dimensions on request
SNT 528 - 23228K - TSNG528
📏 Dimensions on request
MSE800BRHSAFQA
📏 Dimensions on request
68514417370
📏 Dimensions on request
68514450031
📏 Dimensions on request
LSM130BRHTPKPS
📏 Dimensions on request
SNT 520-617 - 22220K - LO520/ 3-7/16
📏 Dimensions on request
LSM100BRHSRSS
📏 Dimensions on request