22X32X7-RLS35-S
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514485028
Custom & Special Bearings · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514485028 is a Custom & Special Bearings, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | ljZI3fbrcj |
| Color | Black |
| Dimension J-1 | 130 mm5.12 in |
| Dimension J-2 | 100 mm3.94 in |
| Dimension K | 50 mm1.97 in |
| Dimension L | 155 mm6.1 in |
| Dimension O | 15 mm0.59 in |
| Dimension P | Series 10.5 mm0.41 in |
| Dimension R | 15 mm |
| Dimension Series G | Series 8 mm0.31 in |
| Dimension Series M | 17 mm |
| Dimension T | 12.5 mm |
| Distance at Series 20° Angle of Pretension (Normal Force Level) (Dimension S) | Series 44 mm1.7 in |
| Element Material | Natural Rubber |
| Force at Series 20° Angle of Pretension (Normal Force Level) (Dimension F) | 380 N85.4 lb |
| Mounting Bolt Size | M10 |
| Mounting Bolt Torque | 86 N·m761 in·lb |
| Normal Temperature Range | -40 to 80 oF |
| Notes | The recommended angle of pretension is Series 20°. This provides the tensioner a maximum capability to absorb vibrations and shock loads, while also maintaining a range of motion to address the system’s belt or chain stretch.Mounting accessories into the "Hard" Position results in approximately 25% higher tensioning force over the "normal" position.Metric standard tensioner units all come with a mounting screw, but do not come with the sprocket idler bolt (which is supplied instead with RunRight metric idler sprockets). |
| Outside Diameter (Dim D) | 78 mm3.07 in |
| Overall Length (Dim E) | 108 mm4.25 in |
| Style | Elastomeric |
| Tensioner | RT F27-Series M |
| Type | Chain/Belt Tensioner |
| UPC Number | 85028 |
ZS2P420FYHDimensions on request
231/500YMBW507C08C3
📏 Dimensions on request
SNT 528 - 23228K - TSNG528
📏 Dimensions on request
MSE800BRHSAFQA
📏 Dimensions on request
68514417370
📏 Dimensions on request
68514450031
📏 Dimensions on request
LSM130BRHTPKPS
📏 Dimensions on request
SNT 520-617 - 22220K - LO520/ 3-7/16
📏 Dimensions on request
LSM100BRHSRSS
📏 Dimensions on request
28X40X7-R2LS32-V
📏 Dimensions on request
68514485273
📏 Dimensions on request