68514445295
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498310
Custom & Special Bearings · Dimensions on request
13.01 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498310 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 13.01 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 13.01 lb |
| Catalogue Ref. | 3fBUQ92l14 |
| # of Locking Screws | 12 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 34.00 mm1.339 in |
| Coupling Size | SLD1350 |
| Cubic inches | 4Series 648.18092 mm³182.99925 in3 |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | 160.00 mm6.299 in |
| Locking Screw Size (Dimension T) | M14 |
| Max. Transmissible Axial Force | 98204.00 lbf |
| Max. Transmissible Torque | 25775.00 ft·lb |
| Pressure on The Hub | 24802.00 psi |
| Pressure on The Shaft | 24511.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 136.00 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 210.00 mm8.268 in |
| Shaft Size | 160 x 210 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 54.00 mm2.126 in |
| Tolerance of Hub Bore (T2) | -0 +0.0028 in |
| Tolerance of Shaft (T1) | +0 -0.0025 in |
| Total Width at Relaxed State (Dimension L) | 68.00 mm2.677 in |
| Type | Internal |
68514461156
📏 Dimensions on request
MSM560BXHS
📏 Dimensions on request
68514412106
📏 Dimensions on request
68514449994
📏 Dimensions on request
68514450682
📏 Dimensions on request
HSE908BRHSRSS
📏 Dimensions on request
MSE900BRHSRSS
📏 Dimensions on request
Y32224M
📏 Dimensions on request
LSE308BXHSAFQ-4B
📏 Dimensions on request
LSE912BXHSATL
📏 Dimensions on request
148X170X15-RLS35-S
📏 Dimensions on request
HSE612BXHSRSS
📏 Dimensions on request