Name: TIMKEN 68514450682
Brand: TIMKEN
SKU: 3g2EsAddeu

TIMKEN 68514450682

Custom & Special Bearings · Dimensions on request

25.13 lbWeight

✓323,474 SKUs in the online catalogue ✓OEM & custom bearings welcome ✓Reply within 30 minutes (working days) ✓Global shipping from Wuxi, China

Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China ⚡ Reply ≤ 30 min

The TIMKEN 68514450682 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 25.13 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.

Brand

TIMKEN

Category

Custom & Special Bearings

Type

Custom & Special Bearings

Dimensions (d × D × B)

Dimensions on request

Weight

25.13 lb

Catalogue Ref.

3g2EsAddeu

Bore Type

Element w/ Hardware

Color

Beige

Coupling Size

LF250

Coupling Type

Torsional

Cubic inches

542.44393 in3

Dimension HD

160.00 mm6.299 in

Features

Wide range of standard designs and materials Application versatility Shaft to shaft or flywheel to shaft designs Designed to accommodate substantial shock loads, vibration, and misalignment Low moment of inertia Electrically insulating No lubrication, maintenance free Unique air-flow cooling design Different element stiffness values allow for torsional tuning of applications with diesel engines Economic design allows for cost effective solutions for torsional applications Proven L-LOC spline-clamping hub virtually eliminates spline shaft profile wear and "fretting" Oil, heat, and corrosion resistant elements (Hytrel®, Zytel®) When used with S-bolts, the coupling can accommodate some end float S-bolts accommodate applications requiring "blind" assembly Model 6 unique spacer designs span gaps between equipment in excess of the normal equipment separation Model 6 design available with bearings for high speeds and large amounts of equipment separation

Length thru Bore

100.00 mm3.030 in

Material

Hytrel®

Max. Bore (Dimensions ID1/ID2) - Flanged Hubs

130.00 mm5.000 in

Normal Temperature Range

-Series 60 to 250 ºF

Notes

For Hytrel, dynamic torsional stiffness values are non-linear with respect to torque. Value given is for 100% of nominal torque. Angular and parallel misalignment values are dependent on speed, and for rubber elements, should be adjusted according to figure 4. Hytrel® elements are only for applications where the driven component is piloted to the driver for SAE and DIN established alignments (i.e. Hydraulic pump flange-mounted to engine flywheel housing).Hytrel® elements are only for applications where the driven component is piloted to the driver for essentially perfect alignment (hydraulic pump flange-mounted to engine housing).

Thread (Dimension T)

M20

Torsional Element Specifications

Elements made of DuPont’s Hytrel® elastomer compound are torsionally much stiffer than natural rubber (Series 20 times stiffer) and were developed for combustion engine / hydraulic pump applications. Hytrel® elements have Series 20% greater torque capacity as compared to rubber elements. The torsionally stiff Hytrel® element moves the harmful vibration resonance frequency above the operating RPM range. The element design also reduces harmful radial and axial reactionary forces.Operating Temperature Range: -Series 60° to 250° FMaximum Angular Misalignment: 0.25°