HSM140BRHSKPS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498012
Custom & Special Bearings · Dimensions on request
0.99 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498012 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.99 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.99 lb |
| Catalogue Ref. | lz8Xwu3s2q |
| # of Locking Screws | Series 5 |
| Application | External Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 18.00 mm0.709 in |
| Coupling Size | SLD900 |
| Cubic inches | 267.90948 mm³Series 10.54762 in3 |
| Disc Outside Diameter (Dimension D) | 72.01 mm2.835 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Gap Width at Relaxed State (Dimension e) | 0.098 in |
| Hub Outside Diameter (Dimension d) | 36.00 mm1.417 in |
| Locking Screw Size (Dimension T) | M6 |
| Locking Screws Size | M6 |
| Max. Diametrical Clearance (Dimension C) | 0.001 in |
| Max. Transmissible Torque (at low end of shaft diameter range) | 297.00 ft·lb |
| Max. Transmissible Torque (min to max shaft diameter) | 297 to 465 ft·lb |
| Screw Material | Steel |
| Screw Tightening Torque | 9.00 ft·lb |
| Screw Type | Hex Head Bolt |
| Shaft Diameter (Dimension ds) | 1.063 in |
| Shaft Locking Device Outside Diameter (Dimension D) | 72.01 mm2.835 in |
| Shaft Size | 36.00 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 23.00 mm0.906 in |
| Tolerance of Hub Outside Diameter (T3) | +0 - 0.0015 in |
| Total Thrust Rings Width at Relaxed State (Dimension L) | 27.00 mm1.063 in |
| Type | External |
68514424496
📏 Dimensions on request
MSM80BRHSRSS
📏 Dimensions on request
SNT 530 - 22230 - TA230
📏 Dimensions on request
NRB3X23,8-G2
📏 Dimensions on request
MSM55BRHTPKPS
📏 Dimensions on request
69790498030
📏 Dimensions on request
MSE508BRHSAFQ
📏 Dimensions on request
69790498475
📏 Dimensions on request
LFSR32-100/180-St
📏 Dimensions on request
LSE508BXHSNQARSS
📏 Dimensions on request
HSM150BXHSATL
📏 Dimensions on request
MSE2200BXHSKPS
📏 Dimensions on request