MSE508BRHSAFQ
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498030
Custom & Special Bearings · Dimensions on request
105.82 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498030 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 105.82 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 105.82 lb |
| Catalogue Ref. | m0rBSu7m7g |
| # of Locking Screws | 12 |
| Application | External Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 71.00 mm2.795 in |
| Coupling Size | SLD900 |
| Cubic inches | 18231.56506 mm³717.77815 in3 |
| Disc Outside Diameter (Dimension D) | 350.01 mm13.780 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Gap Width at Relaxed State (Dimension e) | 0.295 in |
| Hub Outside Diameter (Dimension d) | 200.00 mm7.874 in |
| Locking Screw Size (Dimension T) | M16 |
| Locking Screws Size | M16 |
| Max. Diametrical Clearance (Dimension C) | 0.003 in |
| Max. Transmissible Torque (at low end of shaft diameter range) | 56055.00 ft·lb |
| Max. Transmissible Torque (min to max shaft diameter) | 56055 to 65Series 643 ft·lb |
| Screw Material | Steel |
| Screw Tightening Torque | 184.00 ft·lb |
| Screw Type | Hex Head Bolt |
| Shaft Diameter (Dimension ds) | 5.906 in |
| Shaft Locking Device Outside Diameter (Dimension D) | 350.01 mm13.780 in |
| Shaft Size | 200.00 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 86.00 mm3.386 in |
| Tolerance of Hub Outside Diameter (T3) | +0 - 0.0028 in |
| Total Thrust Rings Width at Relaxed State (Dimension L) | 96.00 mm3.780 in |
| Type | External |
69790498475
📏 Dimensions on request
LFSR32-100/180-St
📏 Dimensions on request
LSE508BXHSNQARSS
📏 Dimensions on request
HSM150BXHSATL
📏 Dimensions on request
MSE2200BXHSKPS
📏 Dimensions on request
G1110KLLB
📏 Dimensions on request
68514445197
📏 Dimensions on request
G1201KLLB
📏 Dimensions on request
MSM60BRHFATL
📏 Dimensions on request
LSM105BXHSKPS
📏 Dimensions on request
SNT 518-615 - 23218K - LO518/ 3-1/4
📏 Dimensions on request
MSE912BRHFATL
📏 Dimensions on request