UELT209-27
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN 69790492418
Ball Bearing Units · Dimensions on request
15.30 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790492418 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 15.30 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 15.30 lb |
| Catalogue Ref. | hRDn2u4o3B |
| AISE Motor Frame Size | 602/802 |
| Bore Size (Dimension TB) | 1.7485 to 1.7495 in |
| Color | Metallic |
| Coupling Type | Gear |
| Cubic inches | Series 64.31070 in3 |
| Dimension FD | 212.85 mm8.38 in |
| Dimension HD | 117.60 mm4.630 in |
| Features | Patented Vari-Crown® tooth form for long life Standard 20° pressure angleHeat treated bolts for greater strengthCorrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards Long Universal Hub used for AISE Motor Frames |
| Hub Material | AISI 1045 |
| Hub Style | Exposed Bolt |
| Keyway Size (W x D) | 1/2 x 1/4 in |
| Max. Bore (Dimensions ID1/ID2) | 85 mm3.250 in |
| Max. Speed (Balanced) | 6600.00 rpm |
| Max. Speed (Unbalanced) | 4400 rpm |
| Nominal Torque | 56700 in·lb |
| Notes | Counterbore is required for hub size 1.5. Bore taper is 1-1/4 inch per foot on diameter. Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1.5 through 5.5. Puller Holes are standard on sizes 4 through 6. Puller Holes are available for sizes 1.5 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Inch bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bore and keyway tolerances, consult Lovejoy Engineering Section.1/4 inch hub standoff. |
| Set Screw Style Coupling Size (Dimension T) | No Setscrew |
| Size | 2 1/2 |
| Style | Mill Motor Hub Bored |
| Type | Gear Coupling Hubs |
TAK 1 3/16
📏 Dimensions on request
LSE107BXHF
📏 Dimensions on request
FSNT 208-307 - 21307 - TA307
📏 Dimensions on request
LSE515BRHFKPS
📏 Dimensions on request
1014KRR
📏 Dimensions on request
SNT 515-612 - 22312 - LO312
📏 Dimensions on request
DVC13K203S
📏 Dimensions on request
UCT315
📏 Dimensions on request
QVVMC22V311S
📏 Dimensions on request
QAF15A075S
📏 Dimensions on request
QAAPF18A085S
📏 Dimensions on request
E-PF-TRB-85MM-ECO
📏 Dimensions on request
SUCBT210/F
📏 Dimensions on request