WZ3/8
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790491095
Custom & Special Bearings · Dimensions on request
Series 32.50 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790491095 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of Series 32.50 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | Series 32.50 lb |
| Catalogue Ref. | TOKFC34g3r |
| Bore Type | Rough Stock Bore |
| Center Line to Center Line of Teeth | 177.80 mm7.000 in |
| Color | Metallic |
| Complete Coupling Weight | 120.00 lb |
| Coupling Type | Gear |
| Cubic inches | 104.75000 in3 |
| Dimension D | 200.91 mm7.910 in |
| Dimension FD | 279.40 mm11.00 in |
| Dimension HD | 127.00 mm5.00 in |
| Dimension W | 57.15 mm2.250 in |
| Distance between Shaft Ends (Dimension BSE) | 6.35 mm0.25 in |
| Features | All-Metal Labyrinth SealsAISI 4140 Alloy Steel ConstructionPatented Vari-Crown® tooth form for long lifeStandard Series 20° pressure angleHeat treated bolts for greater strengthCorrosion resistant bolts and nuts for ease of maintenanceProvides parallel, angular misalignment and end floatFlex Half coupling interchangeable with industry standards |
| Hub Material | All Metal |
| Hub Style | Exposed Bolt |
| Length thru Bore | 106.43 mm4.190 in |
| Max. Angular Misalignment | 1.50o per Gear Mesh |
| Max. Bore (Dimensions ID1/ID2) | 38 mm1.5 in |
| Max. Speed (Balanced) | 9000.00 rpm |
| Max. Speed (Unbalanced) | 6000 rpm |
| Nominal Torque | 188500.00 in·lb |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through Series 5. Puller Holes are standard on sizes 4 through 7. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Inch bore and keyway tolerances conform to AGMA 9002-B04. For metric bore and keyway tolerances, consult Lovejoy Engineering Section. |
| Overall Length | 225.55 mmSeries 8.880 in |
| Parallel Misalignment | 0.061 in |
| Size | 3 1/2 |
| Style | Unbored |
| Type | Gear Coupling Hubs |
68514436657
📏 Dimensions on request
68514477182
📏 Dimensions on request
LSE912BXHSHTPS
📏 Dimensions on request
MSE411BRHS
📏 Dimensions on request
LSE215BRHSAFQA-4BKPS
📏 Dimensions on request
LSE307BRHSAFQ-4BATL
📏 Dimensions on request
WT5653F2
📏 Dimensions on request
69790498436
📏 Dimensions on request
68514439160
📏 Dimensions on request
MSE2200BRHS
📏 Dimensions on request
HYDNUT90-INCH.SEAL
📏 Dimensions on request