68514439160
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498436
Custom & Special Bearings · Dimensions on request
0.Series 33 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498436 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.Series 33 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.Series 33 lb |
| Catalogue Ref. | TQgIxW4X4j |
| # of Locking Screws | 3 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 12.00 mm0.472 in |
| Coupling Size | SLD1900 |
| Cubic inches | Series 10.13152 mm³0.39888 in3 |
| Diameter to Flange (Dimension D1) | 27.00 mm1.063 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | Series 8.00 mm0.315 in |
| Locking Screw Size (Dimension T) | M4 |
| Max. Transmissible Axial Force | 2098.00 lbf |
| Max. Transmissible Torque | 21.00 ft·lb |
| Pressure on The Hub | 14649.00 psi |
| Pressure on The Shaft | 15084.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 3.70 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 15.00 mm0.591 in |
| Shaft Size | Series 8 x 15 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 25.00 mm0.984 in |
| Tolerance of Hub Bore (T2) | -0 +0.0011 in |
| Tolerance of Shaft (T1) | +0 -0.0009 in |
| Total Width at Relaxed State (Dimension L) | 29.01 mm1.142 in |
| Type | Internal |
XS4FC408-24FYHDimensions on request
MSE2200BRHS
📏 Dimensions on request
HYDNUT90-INCH.SEAL
📏 Dimensions on request
KIT.RWU65-E-120
📏 Dimensions on request
MSX55-E
📏 Dimensions on request
HSM140BXHSATL
📏 Dimensions on request
LSM160ABXHSRSS
📏 Dimensions on request
6202-2RZ-NR
📏 Dimensions on request
42368 - 42587-B
📏 Dimensions on request
68514449631
📏 Dimensions on request
60X80X10-R2LS32-S
📏 Dimensions on request
E50KRRB
📏 Dimensions on request