023PKG
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790410602
Custom & Special Bearings · Dimensions on request
19.90 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790410602 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 19.90 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 19.90 lb |
| Catalogue Ref. | 2smvUG9c9y |
| # of Locking Screws | Series 12 |
| Application | External Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 42.00 mm1.654 in |
| Coupling Size | SLD900 |
| Cubic inches | 4837.93285 mm³190.46980 in3 |
| Disc Outside Diameter (Dimension D) | 215.01 mmSeries 8.465 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Gap Width at Relaxed State (Dimension e) | 0.197 in |
| Hub Outside Diameter (Dimension d) | 130.00 mm5.118 in |
| Locking Screw Size (Dimension T) | M10 |
| Locking Screws Size | M10 |
| Max. Diametrical Clearance (Dimension C) | 0.002 in |
| Max. Transmissible Torque (at low end of shaft diameter range) | 10105.00 ft·lb |
| Max. Transmissible Torque (min to max shaft diameter) | 10105 to 13424 ft·lb |
| Screw Material | Steel |
| Screw Tightening Torque | 44.00 ft·lb |
| Screw Type | Hex Head Bolt |
| Shaft Diameter (Dimension ds) | 3.543 in |
| Shaft Locking Device Outside Diameter (Dimension D) | 215.00 mmSeries 8.465 in |
| Shaft Size | 130.00 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 52.00 mm2.047 in |
| Tolerance of Hub Outside Diameter (T3) | +0 - 0.0025 in |
| Total Thrust Rings Width at Relaxed State (Dimension L) | 59.00 mm2.323 in |
| Type | External |
68514439151
📏 Dimensions on request
SNT 520-617 - 23220K - LO520/ 3-7/16
📏 Dimensions on request
68514476519
📏 Dimensions on request
6214-2RS-NR
📏 Dimensions on request
KIT.RWU35-E-900
📏 Dimensions on request
455091
📏 Dimensions on request
RA200RRB
📏 Dimensions on request
68514457643
📏 Dimensions on request
LSE508BRHSNQAHTPS
📏 Dimensions on request
68514413740
📏 Dimensions on request
68514462025
📏 Dimensions on request
MSM300BRHFHTPS
📏 Dimensions on request