68514462025
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514413740
Custom & Special Bearings · Dimensions on request
1.68 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514413740 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 1.68 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 1.68 lb |
| Catalogue Ref. | 2usoCnagaR |
| # of Set Screws Required per Hub | 1 |
| Bore Size | 3/8 in |
| Bore Type | Finished Bore |
| Color | Gray/Metallic |
| Coupling | RRU75 |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Coupling Type | Drop-Out |
| Cubic inches | 7.81250 in3 |
| Dimension BC | 50.80 mm2.000 in |
| Dimension D | 60.45 mm2.380 in |
| Dimension FD | 63.50 mm2.500 in |
| Dimension FL1 | 9.65 mm0.380 in |
| Dimension HD | 63.50 mm2.500 in |
| Dimension HL | 31.75 mm1.250 in |
| Dimension S | 45.97 mm1.810 in |
| Hub Style | RRU Hub |
| Keyway Size (W x D) | No Keyway |
| Material | Steel |
| Max. Angular Offset | 4.50 o |
| Max. Bore (Dimensions ID1/ID2) | 31.75 mm1.25 in |
| Max. Parallel Offset | 0.71 mm0.028 in |
| Max. Recommended End Play | 1.02 mm0.040 in |
| Max. Speed | 20000.00 rpm |
| Max. Torque | 175.00 in·lb / 175 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 9.53 mm0.375 in |
| Notes | OAL Tolerance + .19 inch. Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. |
| Overall Length | 108.46 mm4.270 in |
| Pin Location (Dimension SL) | 0.620 in |
| Pin Size | 1/8 in |
| Rated HP at 100 rpm | 0.28 hp |
| Set Screw Thread Size (Dimension T) | 1/4-20 |
| Wind-Up Angle at Max. Torque | 1.82 o |
HK9011090ANDGEDimensions on request
MSM300BRHFHTPS
📏 Dimensions on request
MSM175BXHSATL
📏 Dimensions on request
KIT.RWU45-E-340
📏 Dimensions on request
6214-2RS-C3
📏 Dimensions on request
69790497960
📏 Dimensions on request
HSE704BXHSHTPS
📏 Dimensions on request
69790494591
📏 Dimensions on request
MSM460BRHS
📏 Dimensions on request