GYAE45RR
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN 69790400200
Ball Bearing Units · Dimensions on request
0.60 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790400200 is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 0.60 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.60 lb |
| Catalogue Ref. | NrKfrL2G1t |
| Color | Black |
| Complete Coupling Weight | 80.00 lb |
| Coupling Type | Gear |
| Cubic inches | 48.00000 in3 |
| Depth | 1.00 in |
| Dimension AD | 100.84 mm3.970 in |
| Distance between Shaft Ends (Dimension BSE) | 4.83 mm0.190 in |
| Features | Patented Vari-Crown® tooth form for long life Standard Series 20° pressure angle Heat treated bolts for greater strength Corrosion resistant bolts and nuts for ease of maintenance Provides parallel, angular misalignment and end float Flex Half coupling interchangeable with industry standards |
| Height | 6.000 in |
| Hub Material | Buna-N Rubber |
| Max. Angular Misalignment | 1.50o per Gear Mesh |
| Max. Bore (Dimensions ID1/ID2) | 107 mm4.213 in |
| Max. Speed (Balanced) | 6000.00 rpm |
| Max. Speed (Unbalanced) | 4000 rpm |
| Nominal Torque | 94500 in·lb |
| Normal Temperature Range | -40 to 212 oF |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through 5.5. Puller Holes are standard on sizes 4 through Series 9. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Bore and keyway tolerances conform to ANSI / AGMA 9002-B04. For metric bores and keyway tolerances, consult Lovejoy Engineering Section. |
| Parallel Misalignment | 0.115 in |
| Size | 3 |
| Style | O-Ring |
| Type | O-Rings |
| Width | Series 8.000 in |
MSE207BXHF
📏 Dimensions on request
UCF319
📏 Dimensions on request
QAAPX15A212S
📏 Dimensions on request
LSE115BXHFRSS
📏 Dimensions on request
1207KL
📏 Dimensions on request
MSE1100BXHFRSS
📏 Dimensions on request
QAAFX11A055S
📏 Dimensions on request
SN 612
📏 Dimensions on request
TAPH20K308S
📏 Dimensions on request
FSNT 208-307 - 22208 - LO208
📏 Dimensions on request
MSE303BRHFRSS
📏 Dimensions on request
UCT314
📏 Dimensions on request
LSE211BXHFRSS
📏 Dimensions on request