FSNT 208-307 - 22208 - LO208
📏 Dimensions on request
Product Photo
TIMKENBall Bearing Units
TIMKEN TAPH20K308S
Ball Bearing Units · Dimensions on request
31.8 Kg70.0 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN TAPH20K308S is a Ball Bearing Units, available in the dimensions listed in the specification table below, and a unit weight of 31.8 Kg70.0 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Ball Bearing Units |
| Type | Ball Bearing Units |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 31.8 Kg70.0 lb |
| Catalogue Ref. | NvV0M02O1E |
| Adapter Sleeve Axial Movement Max | 0.965 mm0.038 in |
| Adapter Sleeve Axial Movement Min | 0.686 mm0.027 in |
| Bearing Number | 22220 |
| C - Dynamic Load (Basic) | 97700 lb435 kN |
| C0 - Static Load | 113000 lb502 kN |
| Dimension A | 114.3 mm4.50 in |
| Dimension B | 216.9 mm8.54 in |
| Dimension C | 130 mm5.12 in |
| Dimension D Max | 339.9 mm13.38 in |
| Dimension D Min | 276.4 mm10.88 in |
| Dimension E | 60.5 mm2.38 in |
| Dimension F | 381.00 mm15.000 in |
| Dimension G | 109.50 mm4.310 in |
| Dimension H | 41.9 mm1.65 in |
| Dimension J (Bolt Size) | 20 mm0.750 in |
| Dimension L | 113.3 mm4.46 in |
| Dimension M | 58.4 mm2.3 in |
| Dimension S | 97 mm3.82 in |
| Engineering Group | Mounted Bearing |
| Float | 2.108 mm0.083 in |
| Full Timken Part Number | TAPH20K308ST |
| Grease Lubrication - B/C/O Seal | 900 rpm |
| Grease Lubrication - M/N Seal | 1200 rpm |
| Grease Lubrication - T Seal | 1600 rpm |
| Housing Construction | Four-Bolt Pillow Block |
| Int Radial Clearance Reduction Max | 0.0Series 64 mm0.0025 in |
| Int Radial Clearance Reduction Min | 0.046 mm0.0018 in |
| Locking Style | Tapered Adapter |
| Oil Lubrication - B/C/O Seal | 900 rpm |
| Oil Lubrication - M/N Seal | 1200 rpm |
| Oil Lubrication - T Seal | 2000 rpm |
| Post Install Int Radial Clearance Min | 0.051 mm0.0020 in |
| Pre Install Clearance Max | 0.140 mm0.0055 in |
| Pre Install Clearance Min | 0.109 mm0.0043 in |
| Shaft Size | 3-1/2 in |
| Shaft Size Type | Imperial |
| Shaft Tolerance | 0.102 mm0.0040 in |
| UPC Code | 0883450276276 |
| Y1 - Geometry Factor | 2.85 |
| Y2 - Geometry Factor | 4.24 |
| e - Geometry Factor | 0.24 |
MSE303BRHFRSS
📏 Dimensions on request
UCT314
📏 Dimensions on request
LSE211BXHFRSS
📏 Dimensions on request
QVVF12V055S
📏 Dimensions on request
MSE515BXHFKPS
📏 Dimensions on request
FSNT 512-610 - 22212K - TA512
📏 Dimensions on request
NAU4LKPLF205-15
📏 Dimensions on request
UKFC208 - HE2308
📏 Dimensions on request
QAAFL11A204S
📏 Dimensions on request
SUCPLP204/F
📏 Dimensions on request
LSE1000BXHFATL
📏 Dimensions on request
QAAPL10A050S
📏 Dimensions on request
69790400148
📏 Dimensions on request