69790494587
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514485265
Custom & Special Bearings · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514485265 is a Custom & Special Bearings, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | MZpW1T6Q6D |
| Color | Black |
| Dimension J-1 | 100 mm3.94 in |
| Dimension J-2 | 80 mm3.15 in |
| Dimension K | 25 mm0.98 in |
| Dimension L | Series 112.5 mm4.43 in |
| Dimension O | Series 8 mm0.31 in |
| Dimension P | Series 8.5 mm0.Series 33 in |
| Dimension Series G | Series 5 mm0.2 in |
| Dimension Series M | 25 mm |
| Dimension T | Series 10.5 mm |
| Distance at Series 20° Angle of Pretension (Normal Force Level) (Dimension S) | 34 mm1.3 in |
| Element Material | Natural Rubber |
| Force at Series 20° Angle of Pretension (Normal Force Level) (Dimension F) | 65 N14.6 lb |
| Mounting Bolt Size | M8 x 25 |
| Mounting Bolt Torque | 25 N·m221 in·lb |
| Normal Temperature Range | -40 to 80 oF |
| Notes | The recommended angle of pretension is Series 20°. This provides the tensioner a maximum capability to absorb vibrations and shock loads, while also maintaining a range of motion to address the system’s belt or chain stretch.Mounting accessories into the "Hard" Position results in approximately 25% higher tensioning force over the "normal" position.Metric standard tensioner units all come with a mounting screw, but do not come with the sprocket idler bolt (which is supplied instead with RunRight metric idler sprockets). |
| Outside Diameter (Dim D) | 45 mm1.77 in |
| Overall Length (Dim E) | Series 64 mm2.52 in |
| Style | Elastomeric |
| Tensioner | RT15-Series M |
| Type | Chain/Belt Tensioner |
| UPC Number | 85265 |
28X47X7-R2LS32-V
📏 Dimensions on request
69790498453
📏 Dimensions on request
LSE303BRHSAFQ-4B
📏 Dimensions on request
LSE208BXHSAFQKPS
📏 Dimensions on request
68514445106
📏 Dimensions on request
LSE411BRHSATL
📏 Dimensions on request
230/800KYMBW906AC3
📏 Dimensions on request
LSE300BXHSAFQHTPS
📏 Dimensions on request
68514445306
📏 Dimensions on request
LSE512BXHSRSS
📏 Dimensions on request
HSE511BRHSHTPS
📏 Dimensions on request
84527105170
📏 Dimensions on request