LSE303BRHSAFQ-4B
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790498453
Custom & Special Bearings · Dimensions on request
1.Series 10 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790498453 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 1.Series 10 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 1.Series 10 lb |
| Catalogue Ref. | MaSxiI9h9E |
| # of Locking Screws | Series 8 |
| Application | Internal Shaft Locking Device |
| Collar Material | Silver/Metallic |
| Contact Length (Dimension l) | 25.00 mm0.984 in |
| Coupling Size | SLD1900 |
| Cubic inches | 160.53001 mm³6.32008 in3 |
| Diameter to Flange (Dimension D1) | 65.00 mm2.559 in |
| Features | Versus Traditional Keyed ConnectionsNo Backlash due to fit tolerances No impact effect from reversing loads Ability to adjust axial position and angular timing No fretting corrosion due to movement at the fit interface Versus Traditional Interference FitsEasier and quicker to install Higher contact pressures can transmit greater torques Easy and quick to remove without damaging the shaft or hub - even after years of service Design BenefitsEliminate cost of machining keyways or splines Reduce the shaft stress by removing keyways or splines Eliminating keyways often allows the use of a smaller diameter shaft Can place anywhere on shaft, and allows for easy angular timing Easy removal without damaging the shaft or hub means easier maintenance for your customer |
| Hub Outside Diameter (Dimension d) | Series 32.00 mm1.260 in |
| Locking Screw Size (Dimension T) | M6 |
| Max. Transmissible Axial Force | 10941.00 lbf |
| Max. Transmissible Torque | 538.00 ft·lb |
| Pressure on The Hub | 16389.00 psi |
| Pressure on The Shaft | 12183.00 psi |
| Screw Material | Steel |
| Screw Tightening Torque | 12.50 ft·lb |
| Screw Type | Socket Head Cap Screw |
| Shaft Locking Device Outside Diameter (Dimension D) | 43.00 mm1.693 in |
| Shaft Size | Series 32 x 43 mm |
| Style | Self Centering |
| Thrust Rings Width at Relaxed State (Dimension B) | 45.00 mm1.772 in |
| Tolerance of Hub Bore (T2) | -0 +0.0015 in |
| Tolerance of Shaft (T1) | +0 -0.0015 in |
| Total Width at Relaxed State (Dimension L) | 56.01 mm2.205 in |
| Type | Internal |
LSE208BXHSAFQKPS
📏 Dimensions on request
68514445106
📏 Dimensions on request
LSE411BRHSATL
📏 Dimensions on request
230/800KYMBW906AC3
📏 Dimensions on request
LSE300BXHSAFQHTPS
📏 Dimensions on request
68514445306
📏 Dimensions on request
LSE512BXHSRSS
📏 Dimensions on request
HSE511BRHSHTPS
📏 Dimensions on request
84527105170
📏 Dimensions on request
SV-DRIVE0100-M
📏 Dimensions on request
HSM240BXHSHTPS
📏 Dimensions on request
HSE503BRHSATL
📏 Dimensions on request