68514480084
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514485030
Custom & Special Bearings · Dimensions on request
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514485030 is a Custom & Special Bearings, available in the dimensions listed in the specification table below. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Catalogue Ref. | QI1jGzcPe1 |
| Color | Black |
| Dimension J-1 | 225 mmSeries 8.86 in |
| Dimension J-2 | 180 mm7.09 in |
| Dimension K | 70 mm2.76 in |
| Dimension L | 260 mmSeries 10.24 in |
| Dimension O | 18 mm0.71 in |
| Dimension P | 12.5 mm0.49 in |
| Dimension R | 24 mm |
| Dimension Series G | Series 12 mm0.47 in |
| Dimension Series M | Series 32 mm |
| Dimension T | 20.5 mm |
| Distance at Series 20° Angle of Pretension (Normal Force Level) (Dimension S) | 78 mm3.1 in |
| Element Material | Natural Rubber |
| Force at Series 20° Angle of Pretension (Normal Force Level) (Dimension F) | 1300 N292.5 lb |
| Mounting Bolt Size | M16 |
| Mounting Bolt Torque | 410 N·m3629 in·lb |
| Normal Temperature Range | -40 to 80 oF |
| Notes | The recommended angle of pretension is Series 20°. This provides the tensioner a maximum capability to absorb vibrations and shock loads, while also maintaining a range of motion to address the system’s belt or chain stretch.Mounting accessories into the "Hard" Position results in approximately 25% higher tensioning force over the "normal" position.Metric standard tensioner units all come with a mounting screw, but do not come with the sprocket idler bolt (which is supplied instead with RunRight metric idler sprockets). |
| Outside Diameter (Dim D) | 115 mm4.53 in |
| Overall Length (Dim E) | 200 mm7.87 in |
| Style | Elastomeric |
| Tensioner | RT F45-Series M |
| Type | Chain/Belt Tensioner |
| UPC Number | 85030 |
KIT.KWVE45-B-100
📏 Dimensions on request
SNT 528 - 23228K - TA528
📏 Dimensions on request
69790497975
📏 Dimensions on request
LSE215BXHFRSS
📏 Dimensions on request
68514477186
📏 Dimensions on request
HSE515BRHSRSS
📏 Dimensions on request
LSM80BRHSNQAKPS
📏 Dimensions on request
HSE507BXHSKPS
📏 Dimensions on request
68514462009
📏 Dimensions on request
68514456568
📏 Dimensions on request
6204-2RZ-C3
📏 Dimensions on request
69790493033
📏 Dimensions on request
LSE308BRHS
📏 Dimensions on request