LSE308BRHS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790493033
Custom & Special Bearings · Dimensions on request
44.80 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790493033 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 44.80 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 44.80 lb |
| Catalogue Ref. | QLXNJ77s7o |
| Bore Size | 2 5/8 in |
| Center Line to Center Line of Teeth | 203.20 mm8.000 in |
| Color | Metallic |
| Complete Coupling Weight | 185.00 lb |
| Coupling Type | Gear |
| Cubic inches | 157.04688 in3 |
| Dimension D | 234.95 mm9.250 in |
| Dimension FD | 317.50 mm12.50 in |
| Dimension HD | 146.05 mm5.750 in |
| Dimension W | 63.50 mm2.500 in |
| Distance between Shaft Ends (Dimension BSE) | 6.35 mm0.25 in |
| Features | All-Metal Labyrinth SealsAISI 4140 Alloy Steel ConstructionPatented Vari-Crown® tooth form for long lifeStandard 20° pressure angleHeat treated bolts for greater strengthCorrosion resistant bolts and nuts for ease of maintenanceProvides parallel, angular misalignment and end floatFlex Half coupling interchangeable with industry standards |
| Hub Material | All Metal |
| Hub Style | Exposed Bolt |
| Keyway Size (W x D) | 5/8 x 5/16 in |
| Length thru Bore | 120.65 mm4.750 in |
| Max. Angular Misalignment | 1.50o per Gear Mesh |
| Max. Bore (Dimensions ID1/ID2) | 107.95 mm4.250 in |
| Max. Speed (Balanced) | 7890.00 rpm |
| Max. Speed (Unbalanced) | 5260.00 rpm |
| Nominal Torque | 283800.00 in·lb |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through 5. Puller Holes are standard on sizes 4 through 7. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Inch bore and keyway tolerances conform to AGMA 9002-B04. For metric bore and keyway tolerances, consult Lovejoy Engineering Section. |
| Overall Length | 257.30 mm10.130 in |
| Parallel Misalignment | 0.700 in |
| Size | 4 |
| Style | Bored |
| Type | Gear Coupling Hubs |
68514462058
📏 Dimensions on request
105X125X13-R2LS32-S
📏 Dimensions on request
69790498217
📏 Dimensions on request
MSE611BXHSRSS
📏 Dimensions on request
68514476976
📏 Dimensions on request
68514445301
📏 Dimensions on request
LSE408BXHFKPS
📏 Dimensions on request
69790498068
📏 Dimensions on request
68514455573
📏 Dimensions on request
68514436731
📏 Dimensions on request
68514425124
📏 Dimensions on request