Name: TIMKEN 68514462417
Brand: TIMKEN
SKU: y1iyWJ8l8t

TIMKEN 68514462417

Custom & Special Bearings · Dimensions on request

12.00 lbWeight

✓323,474 SKUs in the online catalogue ✓OEM & custom bearings welcome ✓Reply within 30 minutes (working days) ✓Global shipping from Wuxi, China

Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China ⚡ Reply ≤ 30 min

The TIMKEN 68514462417 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 12.00 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.

Brand

TIMKEN

Category

Custom & Special Bearings

Type

Custom & Special Bearings

Dimensions (d × D × B)

Dimensions on request

Weight

12.00 lb

Catalogue Ref.

y1iyWJ8l8t

Angular Displacement

0.110 in

Bore Type

Rough Stock Bore

Color

Gray

Coupling Size

65/75

Coupling Type

Jaw

Cubic inches

117.01382 in3

Dimension G

35.05 mm1.380 in

Dimension HD

115.06 mm4.530 in

Dimension U

46.99 mm1.850 in

Distance between Spider and Hub Face (Dimension CL)

4.57 mm0.180 in

Elastomer Characteristic

Four types of spiders are available for the CJ Series of couplings Urethane spiders provide high abrasion resistance and elasticity, along with good damping characteristics The spiders are offered in a variety of shore hard nesses, each providing a different level of torque capacity, damping, and chemical resistance The 92A shore insert (yellow in color) is the standard, offering excellent torque carrying capacity The 80A shore insert (blue) offers the best damping characteristics The 95/98A shore spider (red) offers higher torque than the standard 92 shore, but retains greater damping capacity compared to the Series 64D shore insert (green) The Series 64D shore insert is offered for high humidity environments, higher temperatures, and offers the highest torque capacity The standard curved jaw spider design has a hole in the center to accommodate small between shaft end measurements The 80A, 92A, and 95/98A shore spiders have a temperature capacity of 212° F The Series 64D shore spider has a temperature capacity of 230° F The curved jaw spiders urethane material also resists oil, dirt, sand, grease, moisture, many solvents, as well as atmospheric effects of ozone

Hub Material

Cast Iron

Hub Style

Length thru Bore (Dimensions LTB1/LTB2)

74.93 mm2.950 in

Max Torque (with 92 Shore A spider)

1250.00 N·m11060.00 in·lb

Max. Angular Displacement (∆ Ka), n=1500 [1/min]

1.20 o

Max. Axial Displacement (∆ Ka)

0.1020 in

Max. Bore (Dimensions ID1/ID2)

65 mm2.560 in

Max. Radial Displacement (∆ Kr)

0.0160 in

Max. Speed

4250.00 rpm

Max. Temperature Range (with 80 Shore A, 92 Shore A, and 95/98 Shore A spiders)

-50 to 248 oF

Min. Bore (Dimensions ID1/ID2)

12 mm0.470 in

Nominal Torque (with 92 Shore A spider)

625.00 N·m5530.00 in·lb

Normal Temperature Range (with 80 Shore A, 92 Shore A, and 95/98 Shore A spiders)

-40 to 212 oF

Notes

Maximum bore may be achieved through the use of a shallow keyway.Maximum bore refers to maximum straight bore with keyway allowed in hub.Outside Diameter is equal to Dimension HD for B style aluminum sizes: 19, 24, and 28.S = Solid hub with no boreSpider Outside Diameter (Dimension A) is equal to Outside DiameterThe values regarding displacement are provided assuming normal operating conditions (i.e. temperature, torque with nominal rating of the coupling, speed/RPM rating of the coupling, and misalignment). Careful installation (i.e. alignment) and periodic inspection should be provided to provide the optimum life of the coupling. Special consideration should be given as to the position of the shafts and the amount of axial movement the coupling will be exposed to. The more accurate the alignment of the coupling, will result in greater life of the elastomer. A coupling guard and rotating equipment safety procedures should always be followed. Please consult the Lovejoy web site at www.lovejoy-inc.com for assembly instructions of the curved jaw coupling.

Outside Diameter

134.87 mm5.310 in

Overall Coupling Length

105.41 mm4.150 in

Set Screw Style Coupling Location Size (Dimension SL)

20.07 mm0.790 in

Set Screw Style Coupling Size (Dimension T)

3/8-16

Spider Inside Diameter

68.00 mm2.680 in

Spider Outside Diameter

135.00 mm5.310 in

Spider Thickness (Dimension W)

26.00 mm1.020 in

Style

Unbored

The Curved Jaw Design

Three piece design that is easy to assembleThe curved jaw design incorporates both radial and axial curvature (crowning) to the elastomer (spider)Hubs are offered in sintered iron, steel, aluminum, cast iron and nodular iron materialsThree different urethane elastomers availableNo metal to metal contact and no lubrication requiredFail safe design due to the jaw in compression design (continues to function after the elastomer fails)The CJ series covers a torque range of 67 to 247,800 in-lbs

Type

Curved Jaw Couplings