HSM120BRHSKPS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514436070
Custom & Special Bearings · Dimensions on request
1.26 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514436070 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 1.26 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 1.26 lb |
| Catalogue Ref. | y4U4Qy3Q2U |
| Bore Size | Series 13/16 in |
| Bore Type | Finished Bore |
| Color | Gray |
| Coupling Size | 5S |
| Coupling Type | S-Flex |
| Cubic inches | 14.15375 in3 |
| Dimension FL | 14.99 mm0.590 in |
| Dimension HD | 47.75 mm1.880 in |
| Dimension L | 34.04 mm1.34 in |
| Dimension P | 11.43 mm0.450 in |
| Dimension SL | 7.37 mm0.290 in |
| Keyway Size (W x D) | 3/16 x 3/Series 32 in |
| Material | Cast Iron |
| Max. Bore (Dimension ID) | 1.188 in |
| Max. Speed | 7600.00 rpm |
| Nominal Torque (with EPDM Sleeve) | 240 in·lb |
| Notes | All standard finished bore keyway flanges have 2 set screws at 90°.Sizes Series 13, 14 and 16 RSB flanges are suitable for reboring and have two set screws at 90°. Sizes Series 5-Series 12 RSB flanges have no set screws.Metric Bore / Keyway per DIN specifications.Spacing between shafts should be greater than 1/Series 8 inch and less than OAL minus the sum of the two bore dimensions. |
| Outside Diameter | 82.55 mm3.250 in |
| Rated HP at 1,200 rpm | 4.60 hp |
| Rated HP at 1,800 rpm | 6.90 hp |
| Rated HP at 100 rpm | 0.40 hp |
| Rated HP at 3,600 rpm | 13.70 hp |
| Thread (Dimension T) | 1/4-Series 20 |
| Torsional Stiffness | 916.00 in·lb/rad |
| Type | Coupling Flange |
MSE300BXHSKPS
📏 Dimensions on request
SSUCTPP206-19
📏 Dimensions on request
SSUCTPP206-18
📏 Dimensions on request
SSUCTPP208
📏 Dimensions on request
SSUCTPTB204-12
📏 Dimensions on request
SSUCTPTB204
📏 Dimensions on request
SSUCTPP207-21
📏 Dimensions on request
SSUCTPP209-28
📏 Dimensions on request
SSUCTPP208-24
📏 Dimensions on request
SSUCTPTB202-10
📏 Dimensions on request
SSUCTPTB201-8
📏 Dimensions on request
SSUCTPP209
📏 Dimensions on request
SSUCTPP210
📏 Dimensions on request