HSM105BXHSATL
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514446489
Custom & Special Bearings · Dimensions on request
3.50 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514446489 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 3.50 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 3.50 lb |
| Catalogue Ref. | wv54lT4v3K |
| # of Set Screws Required per Hub | 1 |
| Bore Size | 1/2 in |
| Bore Type | Finished Bore |
| Color | Gray/Metallic |
| Coupling | RRU125 |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Coupling Type | Drop-Out |
| Cubic inches | 21.93869 in3 |
| Dimension BC | 79.25 mm3.120 in |
| Dimension D | 90.42 mm3.560 in |
| Dimension FD | 93.47 mm3.680 in |
| Dimension FL | 12.70 mm0.500 in |
| Dimension FL1 | 12.70 mm0.500 in |
| Dimension HD | 69.85 mm2.750 in |
| Dimension HL | 41.15 mm1.620 in |
| Dimension S | 66.55 mm2.620 in |
| Hub Style | RRU Hub |
| Keyway Size (W x D) | No Keyway |
| Material | Steel |
| Max. Angular Offset | 4.50 o |
| Max. Bore (Dimensions ID1/ID2) | 41.28 mm1.625 in |
| Max. Parallel Offset | 1.12 mm0.044 in |
| Max. Recommended End Play | 1.02 mm0.040 in |
| Max. Speed | 6000 rpm |
| Max. Torque | 755.00 in·lb / 755 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 15.88 mm0.625 in |
| Notes | OAL Tolerance + .19 inch. Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. |
| Overall Length | 148.34 mm5.840 in |
| Pin Location (Dimension SL) | 0.560 in |
| Pin Size | 5/16 in |
| Rated HP at 100 rpm | 1.21 hp |
| Set Screw Thread Size (Dimension T) | 3/8-16 |
| Wind-Up Angle at Max. Torque | 1.85 o |
LSM305BRHSHTPS
📏 Dimensions on request
68514445282
📏 Dimensions on request
69790491093
📏 Dimensions on request
SNT 524-620 - 22224K - TSNG524
📏 Dimensions on request
68514445287
📏 Dimensions on request
NRB3,5X11,8-G2
📏 Dimensions on request
LSM380BXHSHTPS
📏 Dimensions on request
LSM260BRHSATL
📏 Dimensions on request
69790497747
📏 Dimensions on request
HSM220BRHS
📏 Dimensions on request
LSE308BXHSATL
📏 Dimensions on request