SNT 524-620 - 22224K - TSNG524
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 69790491093
Custom & Special Bearings · Dimensions on request
11.50 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 69790491093 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 11.50 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 11.50 lb |
| Catalogue Ref. | wvesB34g3r |
| Bore Type | Rough Stock Bore |
| Center Line to Center Line of Teeth | 127.00 mm5.000 in |
| Color | Metallic |
| Complete Coupling Weight | 50.90 lb |
| Coupling Type | Gear |
| Cubic inches | 39.92601 in3 |
| Dimension D | 150.11 mm5.91 in |
| Dimension FD | 212.85 mmSeries 8.38 in |
| Dimension HD | 92.20 mm3.630 in |
| Dimension W | 44.45 mm1.750 in |
| Distance between Shaft Ends (Dimension BSE) | 4.83 mm0.19 in |
| Features | All-Metal Labyrinth SealsAISI 4140 Alloy Steel ConstructionPatented Vari-Crown® tooth form for long lifeStandard Series 20° pressure angleHeat treated bolts for greater strengthCorrosion resistant bolts and nuts for ease of maintenanceProvides parallel, angular misalignment and end floatFlex Half coupling interchangeable with industry standards |
| Hub Material | All Metal |
| Hub Style | Exposed Bolt |
| Length thru Bore | 76.96 mm3.030 in |
| Max. Angular Misalignment | 1.50o per Gear Mesh |
| Max. Bore (Dimensions ID1/ID2) | 19.00 mm0.750 in |
| Max. Speed (Balanced) | 11850.00 rpm |
| Max. Speed (Unbalanced) | 7900.00 rpm |
| Nominal Torque | 69300 in·lb |
| Notes | Exposed Bolt Design is standard. Shrouded Bolt Design available upon request for sizes 1 through Series 5. Puller Holes are standard on sizes 4 through 7. Puller Holes are available for sizes 1 through 3.5 at an additional charge. Interference bores with no set screws are standard unless otherwise specified. Inch bore and keyway tolerances conform to AGMA 9002-B04. For metric bore and keyway tolerances, consult Lovejoy Engineering Section. |
| Overall Length | 163.58 mm6.440 in |
| Parallel Misalignment | 0.044 in |
| Size | 2 1/2 |
| Style | Unbored |
| Type | Gear Coupling Hubs |
68514445287
📏 Dimensions on request
NRB3,5X11,8-G2
📏 Dimensions on request
LSM380BXHSHTPS
📏 Dimensions on request
LSM260BRHSATL
📏 Dimensions on request
69790497747
📏 Dimensions on request
HSM220BRHS
📏 Dimensions on request
LSE308BXHSATL
📏 Dimensions on request
RA103RR
📏 Dimensions on request
HSM580BRHSRSS
📏 Dimensions on request
MSE608BRHS
📏 Dimensions on request