Name: TIMKEN 68514439501
Brand: TIMKEN
SKU: GnGStEbMcJ

TIMKEN 68514439501

Custom & Special Bearings · Dimensions on request

2.00 lbWeight

✓323,474 SKUs in the online catalogue ✓OEM & custom bearings welcome ✓Reply within 30 minutes (working days) ✓Global shipping from Wuxi, China

Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China ⚡ Reply ≤ 30 min

The TIMKEN 68514439501 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 2.00 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.

Brand

TIMKEN

Category

Custom & Special Bearings

Type

Custom & Special Bearings

Dimensions (d × D × B)

Dimensions on request

Weight

2.00 lb

Catalogue Ref.

GnGStEbMcJ

Color

Metallic

Coupling

050

Coupling Design

The Deltaflex coupling is the real solution to installation, misalignment, and performance problems. Conventional couplings – even when carefully aligned to the manufacturers specifications – cannot match the low level of vibration, moment of inertia, and additional cushion for future misalignment of a visually aligned Deltaflex coupling. In addition, the Deltaflex coupling gives longer life to equipment shaft bearings. That means longer operating time and reduced maintenance cost. The Deltaflex can handle greater shaft misalignment without generating heavy reaction loads on the equipment shaft bearings. A properly applied and installed Deltaflex coupling offers more equipment protection compared to conventional couplings.

Cubic inches

30.93584 in3

Dimension BC

78.23 mm3.080 in

Dimension L

20.57 mm0.810 in

Dimension P

50.749 to 50.800 mm1.998 to 2.000 in

Dimension Q

2.29 mm0.090 in

Dimension R

20.57 mm0.810 in

Dimension TH (Axial Cap / Screw Tap)

5/16-18 x 0.75 in

Features

Maximum misalignment capabilities, with negligible reactionary load, for longer equipment bearing lifeOperates as smoothly when misaligned as when perfectly aligned No lubrication and no maintenance required Equipment can be visually aligned. No special tools are required, which saves on installation time and costEliminates premature equipment bearing and seal failure resulting from misalignment forces. This means greater equipment productivityTorsionally stiff coupling with no backlash means it is capable of high speed applications, within catalog ratingsProvides long-term performance and economy Available in 5 basic sizes, from 10HP to 900HP Standard all-metal and stainless steel versions are both available from stock Many configurations are available, including shaft-to-shaft, spacer, floating shaft, and special assemblies

Hub Style

Delta

Keyway Size (W x D)

No Keyway

Material

Stainless Steel

Max. Bore (Dimensions ID1/ID2)

48.00 mm1.875 in

Max. Continuous Torque

1900.00 in·lb

Max. Parallel Misalignment at Max. Span at 1,750 rpm

3.000 in

Max. Span (Both Ends) at 1,150 rpm

88.000 in

Max. Span (Both Ends) at 1,750 rpm

70.000 in

Max. Span (Both Ends) at 875 rpm

102.000 in

Min. Bore (Dimensions ID1/ID2)

11.00 mm0.438 in

Notes

Size 50: In some bore sizes the tap is 5/8-18. Maximum bores are provided with standard keyway.RSB hubs do not have a keyway. Both Delta hubs and Round hubs are provided with two set screws at 120°. Minimum bore hubs are furnished with 2 set screws at 120°, No Keyway.S is the Spacer drop out or floating shaft length, S = BE-2(R).LTB is the length through the hub bore. OAL is the overall length, OAL = BE + 2(LTB).BE is the distance between the ends of equipment shafts—please supply this dimension when placing orders, BE = OAL-2 (LTB), BE = S + 2 (R), BE 18 inch = Floating Shaft coupling (Type 4).ED

Outside Diameter

6.18 in

Peak Overload Torque

2850.00 in·lb

Rated HP at 1,150 rpm (Standard Motor)

34.00 hp

Rated HP at 1,750 rpm (Standard Motor)

52.40 hp

Rated HP at 100 rpm

3.00 hp

Rated HP at 3,500 rpm (Standard Motor)

105.00 hp