30X40X7-RLS35-V
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514444111
Custom & Special Bearings · Dimensions on request
0.76 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514444111 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.76 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.76 lb |
| Catalogue Ref. | GovxjVdxeU |
| # of Set Screws Required per Hub | 1 |
| Axial Misalignment (∆ Ka) | 0.51 mm0.020 in |
| Bore Size | 5/8 x 3/4 in |
| Bore Type | Finished Bore |
| Color | Gray/Metallic |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 5.48461 in3 |
| Dimension HD | 36.07 mm1.420 in |
| Hub Size | U75S |
| Hub Style | Short |
| Keyway Size (W x D) | 3/16 x 3/32 in |
| Length thru Bore | 21.34 mm0.840 in |
| Material | Steel |
| Max. Bore (Dimensions ID1/ID2) | 19.05 mm0.750 in |
| Max. Parallel Misalignment | 0.48 mm0.019 in |
| Max. Speed | 20000.00 rpm |
| Max. Torque | 175 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 10.00 mm0.375 in |
| Notes | Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. OAL Tolerance: + 1/8 inch. |
| Operating Temperature Range | -40 to 250 oF |
| Overall Length | 69.09 mm2.720 in |
| Pin Location (Dimension SL) | 0.41 in |
| Pin Size | 0.125 in |
| Rated HP at 100 rpm | 0.28 hp |
| Set Screw Thread Size (Dimension T) | 1/4-20 |
| Type | Shaft-to-Shaft |
| Weight (Complete Coupling w/ Max. Bores) | 0.82 lb |
| Wind-Up Angle at Max. Torque | 3.00 o |
| Wind-Up Angle at Nominal Torque | 1.12 o |
LSE303BRHSAFQATL
📏 Dimensions on request
LSE407BXHSKPS
📏 Dimensions on request
6020-2RZ-C3
📏 Dimensions on request
6308-RS-C3
📏 Dimensions on request
038PKG
📏 Dimensions on request
SNW-3030 x 5 1/4
📏 Dimensions on request
MSE408BRHSHTPS
📏 Dimensions on request
68514455473
📏 Dimensions on request
68514445257
📏 Dimensions on request
HH221449 - HH221416
📏 Dimensions on request
68514443164
📏 Dimensions on request
MSE504BXHSKPS
📏 Dimensions on request
69790499876
📏 Dimensions on request