LSM130BRHS
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514431045
Custom & Special Bearings · Dimensions on request
3.96 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514431045 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 3.96 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 3.96 lb |
| Catalogue Ref. | uvPE7fcMdY |
| # of Set Screws Required per Hub | 1 |
| Bore Size | 5/8 in |
| Bore Type | Finished Bore |
| Color | Gray/Metallic |
| Coupling | RRU137 |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Coupling Type | Drop-Out |
| Cubic inches | 36.06667 in3 |
| Dimension BC | 95.25 mm3.750 in |
| Dimension D | 107.95 mm4.250 in |
| Dimension FD | 111.25 mm4.380 in |
| Dimension FL | 12.70 mm0.500 in |
| Dimension FL1 | 12.70 mm0.500 in |
| Dimension HD | 82.55 mm3.250 in |
| Dimension HL | 47.75 mm1.880 in |
| Dimension S | 71.37 mm2.810 in |
| Hub Style | RRU Hub |
| Keyway Size (W x D) | No Keyway |
| Material | Steel |
| Max. Angular Offset | 3.00 o |
| Max. Bore (Dimensions ID1/ID2) | 47.63 mm1.875 in |
| Max. Parallel Offset | 0.89 mm0.035 in |
| Max. Recommended End Play | 1.02 mm0.040 in |
| Max. Speed | 6000 rpm |
| Max. Torque | 1260.00 in·lb / 1260 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 15.88 mm0.625 in |
| Notes | OAL Tolerance + .19 inch. Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. |
| Overall Length | 165.86 mm6.530 in |
| Pin Location (Dimension SL) | 0.690 in |
| Pin Size | 3/8 in |
| Rated HP at 100 rpm | 2.02 hp |
| Set Screw Thread Size (Dimension T) | 3/8-16 |
| Wind-Up Angle at Max. Torque | 1.85 o |
MSE415BXHSHTPS
📏 Dimensions on request
598A - 592D
📏 Dimensions on request
HSM340BXHS
📏 Dimensions on request
G1103KLL
📏 Dimensions on request
HSE512BXHSRSS
📏 Dimensions on request
LSE515BRHSDRSS
📏 Dimensions on request
LSE1900BRHSATL
📏 Dimensions on request
LSE708BRHSAFQHTPS
📏 Dimensions on request
555-S - 552D
📏 Dimensions on request
68514444210
📏 Dimensions on request
68514445279
📏 Dimensions on request
HM926749 - HM926710
📏 Dimensions on request