68514445279
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514444210
Custom & Special Bearings · Dimensions on request
0.60 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514444210 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.60 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.60 lb |
| Catalogue Ref. | uxl7MHcndt |
| # of Set Screws Required per Hub | 1 |
| Bore Size | 7/8 in |
| Bore Type | Finished Bore |
| Color | Gray/Metallic |
| Coupling | RRU50 |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Coupling Type | Drop-Out |
| Cubic inches | 4.00000 in3 |
| Dimension BC | 38.10 mm1.500 in |
| Dimension D | 47.75 mm1.880 in |
| Dimension FD | 50.80 mm2.000 in |
| Dimension FL1 | 6.35 mm0.250 in |
| Dimension HD | 50.80 mm2.000 in |
| Dimension HL | 25.40 mm1.000 in |
| Dimension S | 39.62 mm1.560 in |
| Hub Style | RRU Hub |
| Keyway Size (W x D) | 3/16 x 3/32 in |
| Material | Steel |
| Max. Angular Offset | 4.50 o |
| Max. Bore (Dimensions ID1/ID2) | 25.40 mm1.000 in |
| Max. Parallel Offset | 0.53 mm0.021 in |
| Max. Recommended End Play | 0.89 mm0.035 in |
| Max. Speed | 30000.00 rpm |
| Max. Torque | 82.00 in·lb / 82 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 9.53 mm0.375 in |
| Normal Temperature Range | -40 to 240 oF |
| Notes | OAL Tolerance + .19 inch. Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information. |
| Overall Length | 89.41 mm3.520 in |
| Pin Location (Dimension SL) | 0.500 in |
| Pin Size | 1/8 in |
| Rated HP at 100 rpm | 0.13 hp |
| Set Screw Thread Size (Dimension T) | 1/4-20 |
| Wind-Up Angle at Max. Torque | 1.82 o |
HM926749 - HM926710
📏 Dimensions on request
25578 - 25520
📏 Dimensions on request
68514466897
📏 Dimensions on request
68514477511
📏 Dimensions on request
68514456581
📏 Dimensions on request
MSM105BXHSKPS
📏 Dimensions on request
111PKG
📏 Dimensions on request
LSE703BXHSAFQATL
📏 Dimensions on request
68514439069
📏 Dimensions on request
WT4456F2
📏 Dimensions on request
HM624749 - HM624710
📏 Dimensions on request
68514470011
📏 Dimensions on request