68514415361
📏 Dimensions on request
Product Photo
TIMKENCustom & Special Bearings
TIMKEN 68514413855
Custom & Special Bearings · Dimensions on request
0.50 lbWeight
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The TIMKEN 68514413855 is a Custom & Special Bearings, available in the dimensions listed in the specification table below, and a unit weight of 0.50 lb. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | TIMKEN |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | Dimensions on request |
| Weight | 0.50 lb |
| Catalogue Ref. | MF4Abn3N2R |
| # of Mounting Screws Required | 3 |
| # of Set Screws Required | 1 |
| Bore Size | 1/2 in |
| Bore Type | Finished Bore |
| Color | Gray/Metallic |
| Coupling Design | Flexible Spring Type Coupling with Exclusive Triple Wound Spring DesignThe Uniflex Coupling is an all steel, single piece coupling that solves a variety of application concerns including: high misalignment, space limitations, high temperature, and exceptionally low backlash/windup. The unique flexing center of the Uniflex consists of three opposingly wound square wire springs for forward or reverse operation. Two steel hubs are then brazed to the steel spring pack to create a durable one-piece flexible coupling. |
| Cubic inches | 8.12000 in3 |
| Dimension BC | 38.10 mm1.500 in |
| Dimension D | 47.75 mm1.880 in |
| Dimension FL | 6.35 mm0.250 in |
| Dimension HD | 26.42 mm1.040 in |
| Flange Diameter (Dimension FD) | 50.80 mm2.000 in |
| Hub Size | UFH50R |
| Hub Style | Regular |
| Keyway Size (W x D) | 1/8 x 1/16 in |
| Length thru Bore | 16.26 mm0.Series 640 in |
| Material | Steel |
| Max. Bore (Dimensions ID1/ID2) | 13.00 mm0.500 in |
| Max. Parallel Offset | 0.53 mm0.021 in |
| Max. Recommended End Play | 0.89 mm0.035 in |
| Max. Speed | 30000.00 rpm |
| Max. Torque | 82 in·lb |
| Min. Bore (Dimensions ID1/ID2) | 7.95 mm0.313 in |
| Mounting Screw Thread Size | 1/4-20 |
| Notes | Total backlash is approximately 1/3 of windup at maximum torque – consult Lovejoy Engineering for more information.OAL & Dimension FL Tolerance + .12 inch.Mounting screws not supplied. |
| Operating Temperature Range | -40 to 250 oF |
| Overall Length | 51.56 mm2.030 in |
| Pin Location (Dimension SL) | 0.310 in |
| Rated HP at 100 rpm | 0.13 hp |
| Set Screw Thread Size (Dimension T) | 1/4-20 |
| Type | Flange-to-Shaft |
| Wind-Up Angle at Max. Torque | 4.5 o |
| Wind-Up Angle at Nominal Torque | 1.82 o |
XS4P413FYHDimensions on request
MSE900BXHSRSS
📏 Dimensions on request
MSE504BRHSAFQRSS
📏 Dimensions on request
68514422111
📏 Dimensions on request
LSM100BRHSHTPS
📏 Dimensions on request
68514452199
📏 Dimensions on request
LSE415BXHSKPS
📏 Dimensions on request
68514439067
📏 Dimensions on request
68514457621
📏 Dimensions on request
LM11949 - LM11910
📏 Dimensions on request
LSM460BXHSKPS
📏 Dimensions on request
69790492602
📏 Dimensions on request