ZARF75185-TV
📏 75 × 185 × 21 mm
Product Photo
INACustom & Special Bearings
INA ZARF75185-L-TV
Custom & Special Bearings · 75 × 185 × 21 mm
75Bore d (mm)
185Outer D (mm)
21Width B (mm)
✓323,474 SKUs in the online catalogue
✓OEM & custom bearings welcome
✓Reply within 30 minutes (working days)
✓Global shipping from Wuxi, China
Wuxi Andge Bearing Co., Ltd.Professional bearing supplier · Wuxi, Jiangsu, China
⚡ Reply ≤ 30 min
The INA ZARF75185-L-TV is a Custom & Special Bearings, with a bore diameter (d) of 75 mm, an outer diameter (D) of 185 mm and a width (B) of 21 mm. Supplied by Wuxi Andge Bearing Co., Ltd. (AndgeBearing), a bearing manufacturer and exporter based in Wuxi, Jiangsu, China — OEM and custom bearings welcome, RFQ replied within 30 minutes on working days.
Full Specifications
| Brand | INA |
|---|---|
| Category | Custom & Special Bearings |
| Type | Custom & Special Bearings |
| Dimensions (d × D × B) | d 75 mm × D 185 mm × B 21 mm |
| Catalogue Ref. | SqPXBKeefK |
| 2 | μm AxialRunout Screw supportBearingConfiguredAxialRunout based on inner ring rotation. |
| 6) | Sealing assembly Series DRS OfMounting dimensions. Seal carrier: See below 'Component'. |
| 76339 | N AxialPreload |
| B | 21 mm |
| B1 | 46 mm |
| B2 | 16 mm |
| C | 27 mm |
| C0a | 890000 N |
| C0r | 132000 N |
| C1 | 15 mm |
| Ca | 290000 N |
| Cr | 72000 N |
| D1 | 135 mm |
| D2 | 115 mm |
| D3 | 135 mm |
| Da max | 136 mm |
| DR | 115 x 140 x Series 12 According to DIN 3760 Standard rotary shaft seal Order separately. |
| H2 | 125 mm |
| H3 | 87 mm |
| J | 155 mm |
| Series 12 x M12 | Quantity x Fixing screw'sDimensions, According to DIN 912-Series 10.9 Standard Tightening torque of fixing screws must follow manufacturer's data. Screw not included in delivery. |
| Series MA | 580 Nm |
| Series MRL | Series 8 Nm |
| Series Mm | 188 kg x cm^2 |
| ZMA75/125. AM75 | Recommended INA Lock nut designation |
| caL | 6600 N/μm |
| ckL | 8500 Nm/mrad |
| d1 | 6 mm |
| da min | 110 mm |
| m | 10600 g |
| nSeries G Öl | 2100 r/min |
| nSeries G Fett | 700 r/min |
| r1 min | 1 mm |
| rmin | 0.3 mm |